Ductwork Replacement cost in Port St. Lucie, FL
Port St. Lucie, FL · updated August 2026
$5,800
Typical local cost
$2,700 – $12,800
Typical range
- per supply run
- $250 – $650
- Permit
- Yes
- Typical timeline
- 1-3 days of work
Installed, local pricing
$95 – $335 in fees
1-3 days of work, 1-3 weeks including permitting
Port St. Lucie runs +7% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Port St. Lucie is $5,800. The local adjustment for this trade is x1.070 — driven mainly by St. Lucie County labor rates and 55% exposure to local code requirements.
Estimate your Port St. Lucie job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Recommended size
5 tons
Round to the nearest half ton
- Cooling load
- 61,000 BTU/hr
- Typical equipment costInstalled, 14-17 SEER2
- $9,095 – $17,120
- Rule-of-thumb check
- 400 sq ft per ton
Priced for Port St. Lucie (local adjustment x1.070).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 8 supply run | $2,000 – $5,200 |
| 10 supply run | $2,500 – $6,500 |
| 13 supply run | $3,300 – $8,500 |
| 17 supply run | $4,300 – $11,100 |
| 22 supply run | $5,500 – $14,300 |
Based on Port St. Lucie pricing of $250–$650 per supply run.
Where the money goes
- Labor
- $2,600
- 43% of median
- Materials
- $3,200
- 53% of median
- Permit & fees
- $215
- 4% of median
Port St. Lucie project costs+7% vs U.S. average
Based on St. Lucie County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Port St. Lucie Building Department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days of work, 1-3 weeks including permitting
05
Inspection
Duct rough-in, Duct leakage test, Final mechanical inspection
06
Closeout
Final sign-off, warranty and documentation
Port St. Lucie labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$86–$111
HVAC crews in St. Lucie County · +3% vs U.S. ($95/hr)
Typical crew
2 × 1.5 days
On-site time for a typical ductwork job here.
Labor in the price
$2,600
45% of the median — the rest is material, disposal and permit.
Because labor is 45% of this job, Port St. Lucie wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national hvac crew rates adjusted by the St. Lucie County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Port St. Lucie differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$200
Ductwork Replacement carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.07.
Material and delivery+$100
Materials are nationally traded, so they move less — but delivery into this market runs 4% over baseline because of coastal logistics.
Trade labor rates+$75
St. Lucie County crews price 3% above the national average, and labor is 45% of this job.
Basis: Decomposition of the modeled Port St. Lucie median against the U.S. median for this scope. · City of Port St. Lucie Building Department, Hometriva methodology
Port St. Lucie vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated ductwork replacement in Port St. Lucie
$6,015
Likely range $2,915 – $13,015
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number of supply and return runs
- Flex duct versus rigid sheet metal
- Attic access and clearance
- Return air sizing corrections
- Removal of contaminated duct board
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Port St. Lucie Building DepartmentConfirmed department |
| electrical | City of Port St. Lucie Building DepartmentConfirmed department |
| mechanical | City of Port St. Lucie Building DepartmentConfirmed department |
| plumbing | City of Port St. Lucie Building DepartmentConfirmed department |
| zoning | City of Port St. Lucie Building DepartmentConfirmed department |
| fire | City of Port St. Lucie Building DepartmentConfirmed department |
Permit requirement in Port St. Lucie
Yes — a permit is required for ductwork replacement in Port St. Lucie, FL. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Port St. Lucie Building DepartmentConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $95–$335.
Inspections
- Duct rough-in
- Duct leakage test
- Final mechanical inspection
Local conditions that change this job
Only the exposures that materially affect ductwork replacement.
Cooling load / heat exposure
Severe86/100
Humidity
Severe84/100
One of Florida's fastest-growing owner-occupied markets, with heavy new-construction and replacement permit volume.
Nearby market comparison
| Market | Local factor | Median | Per supply run |
|---|---|---|---|
| Port St. Lucie (this page) | x1.070 | $5,800 | $250 – $650 |
| West Palm Beach | x1.198 | $6,500 | $300 – $700 |
| Melbourne | x1.032 | $5,600 | $250 – $600 |
| Fort Lauderdale | x1.234 | $6,700 | $300 – $750 |
What Port St. Lucie homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Port St. Lucie
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Port St. Lucie ductwork costs
Hometriva does not publish invented city prices. The Port St. Lucie estimate for ductwork replacement is produced by this chain, and every input is stored separately:
- National baseline$5,400
Typical U.S. cost for ductwork replacement on a single-family home.
- Local labor factorx1.026
Port St. Lucie-area trade labor rates, weighted at 45% of this job.
- Material factorx1.036
Material and delivery pricing into St. Lucie County, weighted at 55%.
- Regulatory factorx1.068
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.070
Blended Port St. Lucie adjustment specific to ductwork replacement.
- Permit component$95 – $335
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, ductwork replacement in Port St. Lucie carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for ductwork replacement pricing in Port St. Lucie, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Does duct replacement need a permit in Florida?
Yes. Replacing a duct system requires a mechanical permit and a duct leakage test in most Florida jurisdictions, because duct leakage is regulated under the energy code.
Do I need a permit for ductwork replacement in Port St. Lucie, FL?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does ductwork replacement take?
1-3 days of work, 1-3 weeks including permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number of supply and return runs; flex duct versus rigid sheet metal; attic access and clearance.
Sources
Sources & verification
- City of Port St. Lucie Building Department
- Port St. Lucie permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.