Ductwork Replacement cost in Troy, MI

Troy, MI · updated August 2026

$5,300

Typical local cost

$2,500 – $11,900

Typical range

per supply run
$250 – $600

Installed, local pricing

Permit
Yes

$80 – $290 in fees

Typical timeline
1-3 days of work

1-3 days of work, 1-3 weeks including permitting

Calculate my ductwork cost

Troy runs -1% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Troy is $5,300. The local adjustment for this trade is x0.989 — driven mainly by Oakland County labor rates and 55% exposure to local code requirements.

Estimate your Troy job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Recommended size

5 tons

Round to the nearest half ton

Cooling load
61,000 BTU/hr
Typical equipment costInstalled, 14-17 SEER2
$8,407 – $15,824
Rule-of-thumb check
400 sq ft per ton

Priced for Troy (local adjustment x0.989).

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
8 supply run$2,000$4,800
10 supply run$2,500$6,000
13 supply run$3,300$7,800
17 supply run$4,300$10,200
22 supply run$5,500$13,200

Based on Troy pricing of $250–$600 per supply run.

Where the money goes

Labor
$2,400
44% of median
Materials
$2,900
53% of median
Permit & fees
$185
3% of median

Troy project costs-1% vs U.S. average

Based on Oakland County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Troy building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of work, 1-3 weeks including permitting

  5. 05

    Inspection

    Duct rough-in, Duct leakage test, Final mechanical inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Troy labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$80–$104

HVAC crews in Oakland County · -4% vs U.S. ($95/hr)

Typical crew

2 × 1.5 days

On-site time for a typical ductwork job here.

Labor in the price

$2,400

45% of the median — the rest is material, disposal and permit.

Because labor is 45% of this job, Troy wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national hvac crew rates adjusted by the Oakland County labor factor (x0.961). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Troy differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$100Code and inspection load$50
Dollars of the Troy difference owned by each driver, versus the U.S. median for ductwork replacement.
  • Trade labor rates-$100

    Oakland County crews price 4% below the national average, and labor is 45% of this job.

  • Code and inspection load+$50

    Ductwork Replacement carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.01.

Basis: Decomposition of the modeled Troy median against the U.S. median for this scope. · City of Troy building department, Hometriva methodology

Troy vs Michigan vs the U.S.

Troy$2,500$11,900Michigan average$2,500$11,900U.S. average$2,500$12,000
Modeled ranges for ductwork replacement. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated ductwork replacement in Troy

$5,485

Likely range $2,685$12,085

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number of supply and return runs
  • Flex duct versus rigid sheet metal
  • Attic access and clearance
  • Return air sizing corrections
  • Removal of contaminated duct board

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Troy building departmentModeled estimate
electricalCity of Troy building departmentModeled estimate
mechanicalCity of Troy building departmentModeled estimate
plumbingCity of Troy building departmentModeled estimate
zoningCity of Troy building departmentModeled estimate
fireCity of Troy building departmentModeled estimate

Permit requirement in Troy

Yes — a permit is required for ductwork replacement in Troy, MI. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Troy building departmentModeled estimate
Permit fee
Estimated allowance $80$290Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Duct rough-in
  2. Duct leakage test
  3. Final mechanical inspection
Full Troy permit guide for ductwork replacement

Local conditions that change this job

Only the exposures that materially affect ductwork replacement.

Cooling load / heat exposure

Severe82/100

Humidity

Severe84/100

Nearby market comparison

MarketLocal factorMedianPer supply run
Troy (this page)x0.989$5,300$250$600
Sterling Heightsx0.989$5,300$250$600
Warrenx0.989$5,300$250$600
Detroitx1.056$5,700$250$650

What Troy homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Troy

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Troy ductwork costs

Hometriva does not publish invented city prices. The Troy estimate for ductwork replacement is produced by this chain, and every input is stored separately:

  1. National baseline$5,400

    Typical U.S. cost for ductwork replacement on a single-family home.

  2. Local labor factorx0.961

    Troy-area trade labor rates, weighted at 45% of this job.

  3. Material factorx0.999

    Material and delivery pricing into Oakland County, weighted at 55%.

  4. Regulatory factorx1.013

    Local code, product-approval and inspection load, applied at 55% for this project type.

  5. Applied multiplierx0.989

    Blended Troy adjustment specific to ductwork replacement.

  6. Permit component$80 – $290

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, ductwork replacement in Troy carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for ductwork replacement pricing in Troy, MI.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for ductwork replacement in Troy, MI?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does ductwork replacement take?

1-3 days of work, 1-3 weeks including permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are number of supply and return runs; flex duct versus rigid sheet metal; attic access and clearance.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages