Ductwork Replacement cost in Henderson, NV

Henderson, NV · updated August 2026

$6,000

Typical local cost

$2,800 – $13,300

Typical range

per supply run
$300 – $650

Installed, local pricing

Permit
Yes

$95 – $330 in fees

Typical timeline
1-3 days of work

1-3 days of work, 1-3 weeks including permitting

Calculate my ductwork cost

Henderson runs +11% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Henderson is $6,000. The local adjustment for this trade is x1.110 — driven mainly by Clark County labor rates and 55% exposure to local code requirements.

Estimate your Henderson job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Recommended size

5 tons

Round to the nearest half ton

Cooling load
61,000 BTU/hr
Typical equipment costInstalled, 14-17 SEER2
$9,435 – $17,760
Rule-of-thumb check
400 sq ft per ton

Priced for Henderson (local adjustment x1.110).

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
8 supply run$2,400$5,200
10 supply run$3,000$6,500
13 supply run$3,900$8,500
17 supply run$5,100$11,100
22 supply run$6,600$14,300

Based on Henderson pricing of $300–$650 per supply run.

Where the money goes

Labor
$2,700
43% of median
Materials
$3,300
53% of median
Permit & fees
$215
3% of median

Henderson project costs+11% vs U.S. average

Based on Clark County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Henderson building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of work, 1-3 weeks including permitting

  5. 05

    Inspection

    Duct rough-in, Duct leakage test, Final mechanical inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Henderson labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$92–$120

HVAC crews in Clark County · +10% vs U.S. ($95/hr)

Typical crew

2 × 1.5 days

On-site time for a typical ductwork job here.

Labor in the price

$2,700

45% of the median — the rest is material, disposal and permit.

Because labor is 45% of this job, Henderson wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national hvac crew rates adjusted by the Clark County labor factor (x1.104). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Henderson differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$250Material and delivery$175Code and inspection load$150
Dollars of the Henderson difference owned by each driver, versus the U.S. median for ductwork replacement.
  • Trade labor rates+$250

    Clark County crews price 10% above the national average, and labor is 45% of this job.

  • Material and delivery+$175

    Materials are nationally traded, so they move less — but delivery into this market runs 6% over baseline.

  • Code and inspection load+$150

    Ductwork Replacement carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.05.

Basis: Decomposition of the modeled Henderson median against the U.S. median for this scope. · City of Henderson building department, Hometriva methodology

Henderson vs Nevada vs the U.S.

Henderson$2,800$13,300Nevada average$2,700$13,000U.S. average$2,500$12,000
Modeled ranges for ductwork replacement. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated ductwork replacement in Henderson

$6,215

Likely range $3,015$13,515

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number of supply and return runs
  • Flex duct versus rigid sheet metal
  • Attic access and clearance
  • Return air sizing corrections
  • Removal of contaminated duct board

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Henderson building departmentModeled estimate
electricalCity of Henderson building departmentModeled estimate
mechanicalCity of Henderson building departmentModeled estimate
plumbingCity of Henderson building departmentModeled estimate
zoningCity of Henderson building departmentModeled estimate
fireCity of Henderson building departmentModeled estimate

Permit requirement in Henderson

Yes — a permit is required for ductwork replacement in Henderson, NV. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Henderson building departmentModeled estimate
Permit fee
Estimated allowance $95$330Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Duct rough-in
  2. Duct leakage test
  3. Final mechanical inspection
Full Henderson permit guide for ductwork replacement

Local conditions that change this job

Only the exposures that materially affect ductwork replacement.

Cooling load / heat exposure

Severe82/100

Humidity

Severe84/100

Nearby market comparison

MarketLocal factorMedianPer supply run
Henderson (this page)x1.110$6,000$300$650
Las Vegasx1.057$5,700$250$650
North Las Vegasx1.110$6,000$300$650
St. Georgex0.989$5,300$250$600

What Henderson homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Henderson

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Henderson ductwork costs

Hometriva does not publish invented city prices. The Henderson estimate for ductwork replacement is produced by this chain, and every input is stored separately:

  1. National baseline$5,400

    Typical U.S. cost for ductwork replacement on a single-family home.

  2. Local labor factorx1.104

    Henderson-area trade labor rates, weighted at 45% of this job.

  3. Material factorx1.060

    Material and delivery pricing into Clark County, weighted at 55%.

  4. Regulatory factorx1.051

    Local code, product-approval and inspection load, applied at 55% for this project type.

  5. Applied multiplierx1.110

    Blended Henderson adjustment specific to ductwork replacement.

  6. Permit component$95 – $330

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, ductwork replacement in Henderson carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for ductwork replacement pricing in Henderson, NV.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for ductwork replacement in Henderson, NV?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does ductwork replacement take?

1-3 days of work, 1-3 weeks including permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are number of supply and return runs; flex duct versus rigid sheet metal; attic access and clearance.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages