Ductwork Replacement cost in Portland, OR
Portland, OR · updated August 2026
$6,700
Typical local cost
$3,100 – $14,800
Typical range
- per supply run
- $300 – $750
- Permit
- Yes
- Typical timeline
- 1-3 days of work
Installed, local pricing
$115 – $410 in fees
1-3 days of work, 1-3 weeks including permitting
Portland runs +23% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Portland homeowners pay around $6,700. The local adjustment for this trade is x1.234 — driven mainly by Multnomah County labor rates and 55% exposure to local code requirements.
Estimate your Portland job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Recommended size
5 tons
Round to the nearest half ton
- Cooling load
- 61,000 BTU/hr
- Typical equipment costInstalled, 14-17 SEER2
- $9,690 – $18,240
- Rule-of-thumb check
- 400 sq ft per ton
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 8 supply run | $2,400 – $6,000 |
| 10 supply run | $3,000 – $7,500 |
| 13 supply run | $3,900 – $9,800 |
| 17 supply run | $5,100 – $12,800 |
| 22 supply run | $6,600 – $16,500 |
Based on Portland pricing of $300–$750 per supply run.
Where the money goes
- Labor
- $3,000
- 43% of median
- Materials
- $3,700
- 53% of median
- Permit & fees
- $265
- 4% of median
Portland project costs+23% vs U.S. average
Based on Multnomah County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Portland building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days of work, 1-3 weeks including permitting
05
Inspection
Duct rough-in, Duct leakage test, Final mechanical inspection
06
Closeout
Final sign-off, warranty and documentation
Portland labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$103–$134
HVAC crews in Multnomah County · +23% vs U.S. ($95/hr)
Typical crew
2 × 1.5 days
On-site time for a typical ductwork job here.
Labor in the price
$3,000
45% of the median — the rest is material, disposal and permit.
Because labor is 45% of this job, Portland wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national hvac crew rates adjusted by the Multnomah County labor factor (x1.234). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Portland differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$575
Multnomah County crews price 23% above the national average, and labor is 45% of this job.
Material and delivery+$325
Materials are nationally traded, so they move less — but delivery into this market runs 11% over baseline.
Code and inspection load+$325
Ductwork Replacement carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.11.
Permit fees+$50
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Portland median against the U.S. median for this scope. · City of Portland building department, Hometriva methodology
Portland vs Oregon vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated ductwork replacement in Portland
$6,965
Likely range $3,365 – $15,065
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number of supply and return runs
- Flex duct versus rigid sheet metal
- Attic access and clearance
- Return air sizing corrections
- Removal of contaminated duct board
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Portland building departmentModeled estimate |
| electrical | City of Portland building departmentModeled estimate |
| mechanical | City of Portland building departmentModeled estimate |
| plumbing | City of Portland building departmentModeled estimate |
| zoning | City of Portland building departmentModeled estimate |
| fire | City of Portland building departmentModeled estimate |
Permit requirement in Portland
Yes — a permit is required for ductwork replacement in Portland, OR. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Portland building departmentModeled estimate
- Permit fee
- Estimated allowance $115–$410Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Duct rough-in
- Duct leakage test
- Final mechanical inspection
Local conditions that change this job
Only the exposures that materially affect ductwork replacement.
Cooling load / heat exposure
Moderate44/100
Humidity
High70/100
Persistent winter rain drives roofing, gutter and moisture-intrusion work, and permit review is among the slower large-metro processes.
Nearby market comparison
| Market | Local factor | Median | Per supply run |
|---|---|---|---|
| Portland (this page) | x1.234 | $6,700 | $300 – $750 |
| Seattle | x1.323 | $7,100 | $350 – $800 |
| Boise | x1.017 | $5,500 | $250 – $600 |
| Sacramento | x1.258 | $6,800 | $300 – $750 |
What Portland homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Portland
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Portland ductwork costs
Hometriva does not publish invented city prices. The Portland estimate for ductwork replacement is produced by this chain, and every input is stored separately:
- National baseline$5,400
Typical U.S. cost for ductwork replacement on a single-family home.
- Local labor factorx1.234
Portland-area trade labor rates, weighted at 45% of this job.
- Material factorx1.109
Material and delivery pricing into Multnomah County, weighted at 55%.
- Regulatory factorx1.108
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.234
Blended Portland adjustment specific to ductwork replacement.
- Permit component$115 – $410
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, ductwork replacement in Portland carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for ductwork replacement pricing in Portland, OR.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Does duct replacement need a permit in Florida?
Yes. Replacing a duct system requires a mechanical permit and a duct leakage test in most Florida jurisdictions, because duct leakage is regulated under the energy code.
Sources
Sources & verification
- City of Portland building department
- Portland permit portal
- Oregon Building Codes Division
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.