Pool Installation cost in Los Angeles, CA
Los Angeles, CA · updated August 2026
$91,000
Typical local cost
$55,800 – $168,800
Typical range
- per in-ground gunite pool
- $55,800 – $168,800
- Permit
- Yes
- Typical timeline
- 8-16 weeks from permit to plaster
Installed, local pricing
$580 – $2,610 in fees
8-16 weeks from permit to plaster
Los Angeles runs +47% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Los Angeles is $91,000. The local adjustment for this trade is x1.468 — driven mainly by Los Angeles County labor rates and 70% exposure to local code requirements.
Estimate your Los Angeles job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Estimated total cost
$118,556 – $174,509
Turnkey, including permit allowance
- Pool surface area
- 450 sq ft
- Shell & excavation
- $69,363
- Decking
- $12,331
- Screen enclosure
- $33,911
- Approx. water volumeAt 5.5 ft average depth
- 18,513 gallons
Priced for Los Angeles (local adjustment x1.468).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| Small pool (under 300 sq ft) | $44,600 – $135,000 |
| Standard pool (300–450 sq ft) | $55,800 – $168,800 |
| Large pool (450–600 sq ft) | $72,500 – $219,400 |
| Large pool with spa and deck | $94,900 – $287,000 |
Based on Los Angeles pricing of $55,800–$168,800 per in-ground gunite pool.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Fiberglass Pool | $61,900 – $95,600 | 25–40 yrs | Low |
| Gunite / Concrete Pool | $86,500 – $154,700 | 50–75 yrs | High |
| Vinyl Liner Pool | $50,100 – $81,900 | 20–30 yrs | Moderate |
Where the money goes
- Labor
- $52,800
- 57% of median
- Materials
- $38,200
- 41% of median
- Permit & fees
- $1,595
- 2% of median
Los Angeles project costs+47% vs U.S. average
Based on Los Angeles County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Los Angeles building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
8-16 weeks from permit to plaster
05
Inspection
Steel / pre-gunite, Plumbing pressure test, Electrical bonding, Deck and barrier, Final pool and safety inspection
06
Closeout
Final sign-off, warranty and documentation
Los Angeles labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$77–$100
Outdoor crews in Los Angeles County · +42% vs U.S. ($62/hr)
Typical crew
4 × 19 days
On-site time for a typical pool job here.
Labor in the price
$52,800
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Los Angeles wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Los Angeles County labor factor (x1.416). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Los Angeles differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$14,950
Los Angeles County crews price 42% above the national average, and labor is 58% of this job.
Code and inspection load+$6,600
Pool Installation carries 70% exposure to local code requirements, and this jurisdiction's review load indexes at x1.15.
Material and delivery+$5,300
Materials are nationally traded, so they move less — but delivery into this market runs 20% over baseline because of coastal logistics.
Permit fees+$500
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Los Angeles median against the U.S. median for this scope. · City of Los Angeles building department, Hometriva methodology
Los Angeles vs California vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated pool installation in Los Angeles
$92,595
Likely range $57,395 – $170,395
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Pool size, depth and shape
- Gunite versus fiberglass versus vinyl liner
- Screen enclosure or cage
- Deck material and square footage
- Heater, saltwater system, spa and water features
- Required safety barrier and alarms
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Los Angeles building departmentModeled estimate |
| electrical | City of Los Angeles building departmentModeled estimate |
| mechanical | City of Los Angeles building departmentModeled estimate |
| plumbing | City of Los Angeles building departmentModeled estimate |
| zoning | City of Los Angeles building departmentModeled estimate |
| fire | City of Los Angeles building departmentModeled estimate |
Permit requirement in Los Angeles
Yes — a permit is required for pool installation in Los Angeles, CA. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Los Angeles building departmentModeled estimate
- Permit fee
- Estimated allowance $580–$2,610Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Steel / pre-gunite
- Plumbing pressure test
- Electrical bonding
- Deck and barrier
- Final pool and safety inspection
Local conditions that change this job
Only the exposures that materially affect pool installation.
Cooling load / heat exposure
Moderate58/100
Freeze-thaw cycles
Minimal4/100
Solar irradiance
Severe86/100
LADBS plan check, seismic retrofit rules and wildfire-zone material requirements shape most exterior and structural projects inside city limits.
Nearby market comparison
| Market | Local factor | Median | Per in-ground gunite pool |
|---|---|---|---|
| Los Angeles (this page) | x1.468 | $91,000 | $55,800 – $168,800 |
| Pasadena | x1.472 | $91,300 | $55,950 – $169,300 |
| Glendale | x1.503 | $93,200 | $57,100 – $172,850 |
| Long Beach | x1.536 | $95,200 | $58,350 – $176,650 |
+ Had pool installation done in Los Angeles? Add what you paid or were quoted
Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.
How Hometriva estimates Los Angeles pool costs
Hometriva does not publish invented city prices. The Los Angeles estimate for pool installation is produced by this chain, and every input is stored separately:
- National baseline$62,000
Typical U.S. cost for pool installation on a single-family home.
- Local labor factorx1.416
Los Angeles-area trade labor rates, weighted at 58% of this job.
- Material factorx1.204
Material and delivery pricing into Los Angeles County, weighted at 42%.
- Regulatory factorx1.152
Local code, product-approval and inspection load, applied at 70% for this project type.
- Applied multiplierx1.468
Blended Los Angeles adjustment specific to pool installation.
- Permit component$580 – $2,610
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, pool installation in Los Angeles carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for pool installation pricing in Los Angeles, CA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for pool installation in Los Angeles, CA?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does pool installation take?
8-16 weeks from permit to plaster. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are pool size, depth and shape; gunite versus fiberglass versus vinyl liner; screen enclosure or cage.
Sources
Sources & verification
- City of Los Angeles building department
- Los Angeles permit portal
- California Building Standards Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.