Whole-House Repipe cost in Clearwater, FL
Clearwater, FL · updated August 2026
$8,700
Typical local cost
$4,800 – $17,000
Typical range
- per house repiped
- $4,800 – $17,000
- Permit
- Yes
- Typical timeline
- 3-6 days of work
Installed, local pricing
$125 – $465 in fees
3-6 days of work, 2-5 weeks including inspections and drywall repair
Clearwater runs +6% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Clearwater is $8,700. The local adjustment for this trade is x1.064 — driven mainly by Pinellas County labor rates and 55% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1-bath home | $3,400 – $11,900 |
| 2-bath home | $4,800 – $17,000 |
| 3-bath home | $6,200 – $22,100 |
| 4+ bath home | $8,200 – $28,900 |
Based on Clearwater pricing of $4,800–$17,000 per house repiped.
Where the money goes
- Labor
- $6,100
- 68% of median
- Materials
- $2,600
- 29% of median
- Permit & fees
- $295
- 3% of median
Clearwater project costs+6% vs U.S. average
Based on Pinellas County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Clearwater building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-6 days of work, 2-5 weeks including inspections and drywall repair
05
Inspection
Rough plumbing / pressure test, Drywall patch, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Clearwater labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$95–$123
Plumbing crews in Pinellas County · +3% vs U.S. ($105/hr)
Typical crew
3 × 2.5 days
On-site time for a typical repipe job here.
Labor in the price
$6,100
70% of the median — the rest is material, disposal and permit.
Because labor is 70% of this job, Clearwater wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Pinellas County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Clearwater differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$250
Whole-House Repipe carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.06.
Trade labor rates+$150
Pinellas County crews price 3% above the national average, and labor is 70% of this job.
Material and delivery+$100
Materials are nationally traded, so they move less — but delivery into this market runs 4% over baseline because of coastal logistics.
Basis: Decomposition of the modeled Clearwater median against the U.S. median for this scope. · City of Clearwater building department, Hometriva methodology
Clearwater vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated whole-house repipe in Clearwater
$8,995
Likely range $5,095 – $17,295
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number of bathrooms and fixtures
- Slab versus attic routing
- PEX versus CPVC versus copper
- Drywall cutting and patching
- House square footage and stories
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Clearwater building departmentModeled estimate |
| electrical | City of Clearwater building departmentModeled estimate |
| mechanical | City of Clearwater building departmentModeled estimate |
| plumbing | City of Clearwater building departmentModeled estimate |
| zoning | City of Clearwater building departmentModeled estimate |
| fire | City of Clearwater building departmentModeled estimate |
Permit requirement in Clearwater
Yes — a permit is required for whole-house repipe in Clearwater, FL. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Clearwater building departmentModeled estimate
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $125–$465.
Inspections
- Rough plumbing / pressure test
- Drywall patch
- Final inspection
Local conditions that change this job
Only the exposures that materially affect whole-house repipe.
Humidity
Severe84/100
Coastal Clearwater parcels frequently require flood elevation documentation with the permit application.
Owner-occupied homes
57%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
46,917
Approximate household count in Clearwater, used to size the contractor pool for this trade.
Permit activity index
x1.03
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per house repiped |
|---|---|---|---|
| Clearwater (this page) | x1.064 | $8,700 | $4,800 – $17,000 |
| St. Petersburg | x1.078 | $8,800 | $4,850 – $17,250 |
| Tampa | x1.086 | $8,900 | $4,900 – $17,400 |
| Brandon | x1.029 | $8,400 | $4,650 – $16,450 |
What Clearwater homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Clearwater
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Clearwater repipe costs
Hometriva does not publish invented city prices. The Clearwater estimate for whole-house repipe is produced by this chain, and every input is stored separately:
- National baseline$8,200
Typical U.S. cost for whole-house repipe on a single-family home.
- Local labor factorx1.026
Clearwater-area trade labor rates, weighted at 70% of this job.
- Material factorx1.042
Material and delivery pricing into Pinellas County, weighted at 30%.
- Regulatory factorx1.058
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.064
Blended Clearwater adjustment specific to whole-house repipe.
- Permit component$125 – $465
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, whole-house repipe in Clearwater carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for whole-house repipe pricing in Clearwater, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to repipe a house?
Yes. A whole-house repipe is major plumbing work and requires a permit, a pressure test inspection and a final inspection in every Florida jurisdiction.
Do I need a permit for whole-house repipe in Clearwater, FL?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does whole-house repipe take?
3-6 days of work, 2-5 weeks including inspections and drywall repair. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number of bathrooms and fixtures; slab versus attic routing; pex versus cpvc versus copper.
Sources
Sources & verification
- City of Clearwater building department
- Clearwater permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.