Whole-House Repipe cost in Fort Lauderdale, FL
Fort Lauderdale, FL · updated August 2026
$10,300
Typical local cost
$5,600 – $20,000
Typical range
- per house repiped
- $5,650 – $20,050
- Permit
- Yes
- Typical timeline
- 3-6 days of work
Installed, local pricing
$155 – $585 in fees
3-6 days of work, 2-5 weeks including inspections and drywall repair
Fort Lauderdale runs +25% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Fort Lauderdale is $10,300. The local adjustment for this trade is x1.253 — driven mainly by Broward County labor rates and 55% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1-bath home | $3,900 – $14,000 |
| 2-bath home | $5,600 – $20,000 |
| 3-bath home | $7,300 – $26,000 |
| 4+ bath home | $9,500 – $34,000 |
Based on Fort Lauderdale pricing of $5,650–$20,050 per house repiped.
Where the money goes
- Labor
- $7,200
- 67% of median
- Materials
- $3,100
- 29% of median
- Permit & fees
- $370
- 3% of median
Fort Lauderdale project costs+25% vs U.S. average
Based on Broward County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Fort Lauderdale Development Services
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-6 days of work, 2-5 weeks including inspections and drywall repair
05
Inspection
Rough plumbing / pressure test, Drywall patch, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Fort Lauderdale labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$109–$141
Plumbing crews in Broward County · +18% vs U.S. ($105/hr)
Typical crew
3 × 2.5 days
On-site time for a typical repipe job here.
Labor in the price
$7,200
70% of the median — the rest is material, disposal and permit.
Because labor is 70% of this job, Fort Lauderdale wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Broward County labor factor (x1.182). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Fort Lauderdale differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$1,050
Broward County crews price 18% above the national average, and labor is 70% of this job.
Code and inspection load+$650
Whole-House Repipe carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.15.
Material and delivery+$275
Materials are nationally traded, so they move less — but delivery into this market runs 11% over baseline because of coastal logistics.
Permit fees+$75
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Fort Lauderdale median against the U.S. median for this scope. · City of Fort Lauderdale Development Services, Hometriva methodology
Fort Lauderdale vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated whole-house repipe in Fort Lauderdale
$10,670
Likely range $5,970 – $20,370
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number of bathrooms and fixtures
- Slab versus attic routing
- PEX versus CPVC versus copper
- Drywall cutting and patching
- House square footage and stories
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Fort Lauderdale Development ServicesConfirmed department |
| electrical | City of Fort Lauderdale Development ServicesConfirmed department |
| mechanical | City of Fort Lauderdale Development ServicesConfirmed department |
| plumbing | City of Fort Lauderdale Development ServicesConfirmed department |
| zoning | City of Fort Lauderdale Development ServicesConfirmed department |
| fire | City of Fort Lauderdale Development ServicesConfirmed department |
Permit requirement in Fort Lauderdale
Yes — a permit is required for whole-house repipe in Fort Lauderdale, FL. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Fort Lauderdale Development ServicesConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $155–$585.
Inspections
- Rough plumbing / pressure test
- Drywall patch
- Final inspection
Local conditions that change this job
Only the exposures that materially affect whole-house repipe.
Humidity
Severe84/100
Broward County is also inside the HVHZ, so wind-borne debris protection is required for most exterior work.
Owner-occupied homes
47%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
73,104
Approximate household count in Fort Lauderdale, used to size the contractor pool for this trade.
Permit activity index
x1.30
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per house repiped |
|---|---|---|---|
| Fort Lauderdale (this page) | x1.253 | $10,300 | $5,650 – $20,050 |
| Miami | x1.311 | $10,800 | $5,900 – $21,000 |
| West Palm Beach | x1.213 | $9,900 | $5,450 – $19,400 |
| Port St. Lucie | x1.067 | $8,700 | $4,800 – $17,050 |
What Fort Lauderdale homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Fort Lauderdale
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Fort Lauderdale repipe costs
Hometriva does not publish invented city prices. The Fort Lauderdale estimate for whole-house repipe is produced by this chain, and every input is stored separately:
- National baseline$8,200
Typical U.S. cost for whole-house repipe on a single-family home.
- Local labor factorx1.182
Fort Lauderdale-area trade labor rates, weighted at 70% of this job.
- Material factorx1.110
Material and delivery pricing into Broward County, weighted at 30%.
- Regulatory factorx1.145
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.253
Blended Fort Lauderdale adjustment specific to whole-house repipe.
- Permit component$155 – $585
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, whole-house repipe in Fort Lauderdale carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for whole-house repipe pricing in Fort Lauderdale, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to repipe a house?
Yes. A whole-house repipe is major plumbing work and requires a permit, a pressure test inspection and a final inspection in every Florida jurisdiction.
Do I need a permit for whole-house repipe in Fort Lauderdale, FL?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does whole-house repipe take?
3-6 days of work, 2-5 weeks including inspections and drywall repair. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number of bathrooms and fixtures; slab versus attic routing; pex versus cpvc versus copper.
Sources
Sources & verification
- City of Fort Lauderdale Development Services
- Fort Lauderdale permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.