Whole-House Repipe cost in Great Falls, MT

Great Falls, MT · updated August 2026

$8,300

Typical local cost

$4,500 – $16,100

Typical range

per house repiped
$4,550 – $16,150

Installed, local pricing

Permit
Yes

$105 – $395 in fees

Typical timeline
3-6 days of work

3-6 days of work, 2-5 weeks including inspections and drywall repair

Great Falls runs +1% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Great Falls is $8,300. The local adjustment for this trade is x1.009 — driven mainly by Cascade County labor rates and 55% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
1-bath home$3,200$11,300
2-bath home$4,500$16,100
3-bath home$5,900$20,900
4+ bath home$7,700$27,400

Based on Great Falls pricing of $4,550–$16,150 per house repiped.

Where the money goes

Labor
$5,800
68% of median
Materials
$2,500
29% of median
Permit & fees
$250
3% of median

Great Falls project costs+1% vs U.S. average

Based on Cascade County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Great Falls building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    3-6 days of work, 2-5 weeks including inspections and drywall repair

  5. 05

    Inspection

    Rough plumbing / pressure test, Drywall patch, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Great Falls labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$92–$120

Plumbing crews in Cascade County · 0% vs U.S. ($105/hr)

Typical crew

3 × 2.5 days

On-site time for a typical repipe job here.

Labor in the price

$5,800

70% of the median — the rest is material, disposal and permit.

Because labor is 70% of this job, Great Falls wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national plumbing crew rates adjusted by the Cascade County labor factor (x1.000). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Great Falls differs from the national average

The local delta, broken into dollars by driver.

Material and delivery$50Permit fees$25Code and inspection load$25
Dollars of the Great Falls difference owned by each driver, versus the U.S. median for whole-house repipe.
  • Material and delivery+$50

    Materials are nationally traded, so they move less — but delivery into this market runs 2% over baseline.

  • Permit fees-$25

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

  • Code and inspection load+$25

    Whole-House Repipe carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.01.

Basis: Decomposition of the modeled Great Falls median against the U.S. median for this scope. · City of Great Falls building department, Hometriva methodology

Great Falls vs Montana vs the U.S.

Great Falls$4,500$16,100Montana average$4,500$16,100U.S. average$4,500$16,000
Modeled ranges for whole-house repipe. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated whole-house repipe in Great Falls

$8,550

Likely range $4,750$16,350

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number of bathrooms and fixtures
  • Slab versus attic routing
  • PEX versus CPVC versus copper
  • Drywall cutting and patching
  • House square footage and stories

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Great Falls building departmentModeled estimate
electricalCity of Great Falls building departmentModeled estimate
mechanicalCity of Great Falls building departmentModeled estimate
plumbingCity of Great Falls building departmentModeled estimate
zoningCity of Great Falls building departmentModeled estimate
fireCity of Great Falls building departmentModeled estimate

Permit requirement in Great Falls

Yes — a permit is required for whole-house repipe in Great Falls, MT. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Great Falls building departmentModeled estimate
Permit fee
Estimated allowance $105$395Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Rough plumbing / pressure test
  2. Drywall patch
  3. Final inspection
Full Great Falls permit guide for whole-house repipe

Local conditions that change this job

Only the exposures that materially affect whole-house repipe.

Humidity

Severe84/100

Owner-occupied homes

0%

Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.

Households in market

24,177

Approximate household count in Great Falls, used to size the contractor pool for this trade.

Permit activity index

x0.88

Relative permit volume and fee load versus the national baseline.

Nearby market comparison

MarketLocal factorMedianPer house repiped
Great Falls (this page)x1.009$8,300$4,550$16,150
Helenax0.968$7,900$4,350$15,500
Bozemanx0.968$7,900$4,350$15,500
Missoulax1.009$8,300$4,550$16,150

What Great Falls homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Great Falls

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Great Falls repipe costs

Hometriva does not publish invented city prices. The Great Falls estimate for whole-house repipe is produced by this chain, and every input is stored separately:

  1. National baseline$8,200

    Typical U.S. cost for whole-house repipe on a single-family home.

  2. Local labor factorx1.000

    Great Falls-area trade labor rates, weighted at 70% of this job.

  3. Material factorx1.016

    Material and delivery pricing into Cascade County, weighted at 30%.

  4. Regulatory factorx1.007

    Local code, product-approval and inspection load, applied at 55% for this project type.

  5. Applied multiplierx1.009

    Blended Great Falls adjustment specific to whole-house repipe.

  6. Permit component$105 – $395

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, whole-house repipe in Great Falls carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for whole-house repipe pricing in Great Falls, MT.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for whole-house repipe in Great Falls, MT?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does whole-house repipe take?

3-6 days of work, 2-5 weeks including inspections and drywall repair. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are number of bathrooms and fixtures; slab versus attic routing; pex versus cpvc versus copper.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages