Whole-House Repipe cost in Santa Fe, NM
Santa Fe, NM · updated August 2026
$7,700
Typical local cost
$4,200 – $15,100
Typical range
- per house repiped
- $4,250 – $15,100
- Permit
- Yes
- Typical timeline
- 3-6 days of work
Installed, local pricing
$105 – $395 in fees
3-6 days of work, 2-5 weeks including inspections and drywall repair
Santa Fe runs -6% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Santa Fe is $7,700. The local adjustment for this trade is x0.944 — driven mainly by Santa Fe County labor rates and 55% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1-bath home | $2,900 – $10,600 |
| 2-bath home | $4,200 – $15,100 |
| 3-bath home | $5,500 – $19,600 |
| 4+ bath home | $7,100 – $25,700 |
Based on Santa Fe pricing of $4,250–$15,100 per house repiped.
Where the money goes
- Labor
- $5,400
- 68% of median
- Materials
- $2,300
- 29% of median
- Permit & fees
- $250
- 3% of median
Santa Fe project costs-6% vs U.S. average
Based on Santa Fe County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Santa Fe building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-6 days of work, 2-5 weeks including inspections and drywall repair
05
Inspection
Rough plumbing / pressure test, Drywall patch, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Santa Fe labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$85–$110
Plumbing crews in Santa Fe County · -8% vs U.S. ($105/hr)
Typical crew
3 × 2.5 days
On-site time for a typical repipe job here.
Labor in the price
$5,400
70% of the median — the rest is material, disposal and permit.
Because labor is 70% of this job, Santa Fe wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Santa Fe County labor factor (x0.922). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Santa Fe differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$450
Santa Fe County crews price 8% below the national average, and labor is 70% of this job.
Material and delivery-$50
Materials are nationally traded, so they move less — but delivery into this market runs 2% under baseline.
Permit fees-$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Code and inspection load+$25
Whole-House Repipe carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.01.
Basis: Decomposition of the modeled Santa Fe median against the U.S. median for this scope. · City of Santa Fe building department, Hometriva methodology
Santa Fe vs New Mexico vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated whole-house repipe in Santa Fe
$7,950
Likely range $4,450 – $15,350
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number of bathrooms and fixtures
- Slab versus attic routing
- PEX versus CPVC versus copper
- Drywall cutting and patching
- House square footage and stories
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Santa Fe building departmentModeled estimate |
| electrical | City of Santa Fe building departmentModeled estimate |
| mechanical | City of Santa Fe building departmentModeled estimate |
| plumbing | City of Santa Fe building departmentModeled estimate |
| zoning | City of Santa Fe building departmentModeled estimate |
| fire | City of Santa Fe building departmentModeled estimate |
Permit requirement in Santa Fe
Yes — a permit is required for whole-house repipe in Santa Fe, NM. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Santa Fe building departmentModeled estimate
- Permit fee
- Estimated allowance $105–$395Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Rough plumbing / pressure test
- Drywall patch
- Final inspection
Local conditions that change this job
Only the exposures that materially affect whole-house repipe.
Humidity
Severe84/100
Owner-occupied homes
0%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
35,603
Approximate household count in Santa Fe, used to size the contractor pool for this trade.
Permit activity index
x0.88
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per house repiped |
|---|---|---|---|
| Santa Fe (this page) | x0.944 | $7,700 | $4,250 – $15,100 |
| Rio Rancho | x0.944 | $7,700 | $4,250 – $15,100 |
| Albuquerque | x0.932 | $7,600 | $4,200 – $14,900 |
| Farmington | x0.904 | $7,400 | $4,050 – $14,450 |
What Santa Fe homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Santa Fe
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Santa Fe repipe costs
Hometriva does not publish invented city prices. The Santa Fe estimate for whole-house repipe is produced by this chain, and every input is stored separately:
- National baseline$8,200
Typical U.S. cost for whole-house repipe on a single-family home.
- Local labor factorx0.922
Santa Fe-area trade labor rates, weighted at 70% of this job.
- Material factorx0.982
Material and delivery pricing into Santa Fe County, weighted at 30%.
- Regulatory factorx1.007
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx0.944
Blended Santa Fe adjustment specific to whole-house repipe.
- Permit component$105 – $395
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, whole-house repipe in Santa Fe carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for whole-house repipe pricing in Santa Fe, NM.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for whole-house repipe in Santa Fe, NM?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does whole-house repipe take?
3-6 days of work, 2-5 weeks including inspections and drywall repair. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number of bathrooms and fixtures; slab versus attic routing; pex versus cpvc versus copper.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.