Whole-House Repipe cost in Pasadena, TX

Pasadena, TX · updated August 2026

$7,900

Typical local cost

$4,300 – $15,400

Typical range

per house repiped
$4,350 – $15,450

Installed, local pricing

Permit
Yes

$115 – $430 in fees

Typical timeline
3-6 days of work

3-6 days of work, 2-5 weeks including inspections and drywall repair

Pasadena runs -4% against the U.S. average · data confidence Medium · modeled estimate, not a quote

Most Pasadena homeowners pay around $7,900. The local adjustment for this trade is x0.965 — driven mainly by Harris County labor rates and 55% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
1 house repiped$4,400$15,500
1 house repiped$4,400$15,500
1 house repiped$4,400$15,500
1 house repiped$4,400$15,500
1 house repiped$4,400$15,500

Based on Pasadena pricing of $4,350–$15,450 per house repiped.

Where the money goes

Labor
$5,500
67% of median
Materials
$2,400
29% of median
Permit & fees
$275
3% of median

Pasadena project costs-4% vs U.S. average

Based on Harris County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Pasadena building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    3-6 days of work, 2-5 weeks including inspections and drywall repair

  5. 05

    Inspection

    Rough plumbing / pressure test, Drywall patch, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Pasadena labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$86–$112

Plumbing crews in Harris County · -6% vs U.S. ($105/hr)

Typical crew

3 × 2.5 days

On-site time for a typical repipe job here.

Labor in the price

$5,500

70% of the median — the rest is material, disposal and permit.

Because labor is 70% of this job, Pasadena wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national plumbing crew rates adjusted by the Harris County labor factor (x0.935). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Pasadena differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$375Code and inspection load$125Material and delivery$25
Dollars of the Pasadena difference owned by each driver, versus the U.S. median for whole-house repipe.
  • Trade labor rates-$375

    Harris County crews price 6% below the national average, and labor is 70% of this job.

  • Code and inspection load+$125

    Whole-House Repipe carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.03.

  • Material and delivery-$25

    Materials are nationally traded, so they move less — but delivery into this market runs 1% under baseline.

Basis: Decomposition of the modeled Pasadena median against the U.S. median for this scope. · City of Pasadena building department, Hometriva methodology

Pasadena vs Texas vs the U.S.

Pasadena$4,300$15,400Texas average$4,300$15,400U.S. average$4,500$16,000
Modeled ranges for whole-house repipe. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated whole-house repipe in Pasadena

$8,175

Likely range $4,575$15,675

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number of bathrooms and fixtures
  • Slab versus attic routing
  • PEX versus CPVC versus copper
  • Drywall cutting and patching
  • House square footage and stories

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Pasadena building departmentModeled estimate
electricalCity of Pasadena building departmentModeled estimate
mechanicalCity of Pasadena building departmentModeled estimate
plumbingCity of Pasadena building departmentModeled estimate
zoningCity of Pasadena building departmentModeled estimate
fireCity of Pasadena building departmentModeled estimate

Permit requirement in Pasadena

Yes — a permit is required for whole-house repipe in Pasadena, TX. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Pasadena building departmentModeled estimate
Permit fee
Estimated allowance $115$430Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Rough plumbing / pressure test
  2. Drywall patch
  3. Final inspection
Full Pasadena permit guide for whole-house repipe

Local conditions that change this job

Only the exposures that materially affect whole-house repipe.

Humidity

Severe84/100

Pasadena sits in Harris County, Texas. Hurricane wind design, wind-borne debris protection and floodplain review add product-approval and inspection steps to most exterior work. Work outside city limits is permitted by the county building department rather than the city.

Owner-occupied homes

0%

Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.

Households in market

59,450

Approximate household count in Pasadena, used to size the contractor pool for this trade.

Permit activity index

x0.95

Relative permit volume and fee load versus the national baseline.

Nearby market comparison

MarketLocal factorMedianPer house repiped
Pasadena (this page)x0.965$7,900$4,350$15,450
El Pasox1.020$8,400$4,600$16,300
Arlingtonx1.020$8,400$4,600$16,300
Corpus Christix0.992$8,100$4,450$15,850

What Pasadena homeowners actually paid

Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Pasadena

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Pasadena repipe costs

Hometriva does not publish invented city prices. The Pasadena estimate for whole-house repipe is produced by this chain, and every input is stored separately:

  1. National baseline$8,200

    Typical U.S. cost for whole-house repipe on a single-family home.

  2. Local labor factorx0.935

    Pasadena-area trade labor rates, weighted at 70% of this job.

  3. Material factorx0.988

    Material and delivery pricing into Harris County, weighted at 30%.

  4. Regulatory factorx1.027

    Local code, product-approval and inspection load, applied at 55% for this project type.

  5. Applied multiplierx0.965

    Blended Pasadena adjustment specific to whole-house repipe.

  6. Permit component$115 – $430

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, whole-house repipe in Pasadena carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for whole-house repipe pricing in Pasadena, TX.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit to repipe a house?

Yes. A whole-house repipe is major plumbing work and requires a permit, a pressure test inspection and a final inspection in every Florida jurisdiction.

Sources

Sources & verification

Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.

Related pages