Roof Repair cost in Aurora, CO
Aurora, CO · updated August 2026
$1,600
Typical local cost
$500 – $5,600
Typical range
- per repair
- $450 – $5,650
- Permit
- It depends
- Typical timeline
- Same day to 2 days
Installed, local pricing
$95 – $375 in fees
Same day to 2 days, 1-3 weeks if a permit is needed
Aurora runs +18% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Aurora is $1,600. The local adjustment for this trade is x1.175 — driven mainly by Arapahoe County labor rates and 60% exposure to local code requirements.
Estimate your Aurora job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Roofing squares needed
14.8
Includes 10% waste
- Roof area
- 1,344 sq ft
- Shingle bundles
- 45 bundles
- Underlayment rolls (4 sq)
- 4 rolls
Priced for Aurora (local adjustment x1.175).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| Minor repair (under 100 sq ft) | $300 – $2,800 |
| Moderate repair (100–300 sq ft) | $500 – $5,600 |
| Major repair (300–600 sq ft) | $900 – $9,500 |
| Repair with decking replacement | $1,300 – $14,000 |
Based on Aurora pricing of $450–$5,650 per repair.
Cost by roof scope
Roof pricing moves on area, pitch, how many layers come off and what the deck looks like underneath. Every row is priced against the Aurora median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Overlay on a simple ranch roof | Single layer, 4:12 pitch, no tear-off | $1,000 – $1,300 |
| Standard tear-off and replace | One layer removed, architectural shingle, walkable pitch | $1,400 – $1,800 |
| Two-layer tear-off | Extra removal and disposal, same footprint | $1,600 – $2,200 |
| Steep or cut-up roof | 8:12+ pitch, multiple valleys, dormers, staging | $2,000 – $2,700 |
| Replacement with deck repair | Partial resheathing found after tear-off | $1,800 – $2,600 |
- • Tear-off and disposal is priced per layer — quotes that omit a second layer are the most common source of change orders.
- • Decking is unknown until the old roof is off. Reputable quotes state a per-sheet resheathing price up front.
- • Pitch above 7:12 requires fall protection and slows the crew, which shows up as labor, not material.
Basis: Each scope is priced as a multiple of the modeled Aurora median for roof repair, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| 3-Tab Asphalt Shingles | $1,000 – $1,400 | 12–20 yrs | Moderate |
| Architectural Asphalt Shingles | $1,400 – $1,900 | 22–30 yrs | Low |
Where the money goes
- Labor
- $1,100
- 60% of median
- Materials
- $500
- 27% of median
- Permit & fees
- $235
- 13% of median
Aurora project costs+18% vs U.S. average
Based on Arapahoe County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Aurora Building Division
03
Materials & staging
Order lead time on non-stock materials
04
Installation
Same day to 2 days, 1-3 weeks if a permit is needed
05
Inspection
Final inspection when permitted
06
Closeout
Final sign-off, warranty and documentation
Aurora labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$69–$90
Exterior crews in Arapahoe County · +16% vs U.S. ($68/hr)
Typical crew
2 × 1 day
On-site time for a typical roof repair job here.
Labor in the price
$1,100
68% of the median — the rest is material, disposal and permit.
Because labor is 68% of this job, Aurora wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Arapahoe County labor factor (x1.156). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Aurora differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$150
Arapahoe County crews price 16% above the national average, and labor is 68% of this job.
Code and inspection load+$50
Roof Repair carries 60% exposure to local code requirements, and this jurisdiction's review load indexes at x1.06.
Material and delivery+$25
Materials are nationally traded, so they move less — but delivery into this market runs 8% over baseline.
Basis: Decomposition of the modeled Aurora median against the U.S. median for this scope. · City of Aurora Building Division, Hometriva methodology
Aurora vs Colorado vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated roof repair in Aurora
$1,835
Likely range $735 – $5,835
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Leak source and how much decking is wet
- Shingle, tile or metal covering
- Flashing, valley or penetration work
- Access and roof pitch
- Emergency versus scheduled service
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Aurora Building DivisionConfirmed department |
| electrical | City of Aurora Building DivisionConfirmed department |
| mechanical | City of Aurora Building DivisionConfirmed department |
| plumbing | City of Aurora Building DivisionConfirmed department |
| zoning | City of Aurora Building DivisionConfirmed department |
| fire | City of Aurora Building DivisionConfirmed department |
Permit requirement in Aurora
It depends on scope. Like-for-like cosmetic work in Aurora is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- City of Aurora Building DivisionConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $95–$375.
Inspections
- Final inspection when permitted
Local conditions that change this job
Only the exposures that materially affect roof repair.
Design wind speed exposure
High70/100
Named-storm exposure
High70/100
Annual rainfall
High74/100
Aurora sits in Arapahoe County, Colorado. Snow load, hail and deep freeze-thaw cycling drive roofing, insulation and exterior envelope specifications well above Sun Belt minimums. Work outside city limits is permitted by the county building department rather than the city.
Owner-occupied homes
0%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
154,504
Approximate household count in Aurora, used to size the contractor pool for this trade.
Permit activity index
x1.07
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
What Aurora homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Aurora
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Aurora roof repair costs
Hometriva does not publish invented city prices. The Aurora estimate for roof repair is produced by this chain, and every input is stored separately:
- National baseline$1,400
Typical U.S. cost for roof repair on a single-family home.
- Local labor factorx1.156
Aurora-area trade labor rates, weighted at 68% of this job.
- Material factorx1.083
Material and delivery pricing into Arapahoe County, weighted at 32%.
- Regulatory factorx1.062
Local code, product-approval and inspection load, applied at 60% for this project type.
- Applied multiplierx1.175
Blended Aurora adjustment specific to roof repair.
- Permit component$95 – $375
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, roof repair in Aurora carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for roof repair pricing in Aurora, CO.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does roof repair take?
Same day to 2 days, 1-3 weeks if a permit is needed. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are leak source and how much decking is wet; shingle, tile or metal covering; flashing, valley or penetration work.
Sources
Sources & verification
- City of Aurora Building Division
- Colorado Division of Fire Prevention and Control
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.