Roof Repair cost in Yakima, WA
Yakima, WA · updated August 2026
$1,700
Typical local cost
$500 – $5,900
Typical range
- per repair
- $500 – $5,950
- Permit
- It depends
- Typical timeline
- Same day to 2 days
Installed, local pricing
$105 – $400 in fees
Same day to 2 days, 1-3 weeks if a permit is needed
Yakima runs +24% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Yakima homeowners pay around $1,700. The local adjustment for this trade is x1.236 — driven mainly by Yakima County labor rates and 60% exposure to local code requirements.
Estimate your Yakima job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Roofing squares needed
14.8
Includes 10% waste
- Roof area
- 1,344 sq ft
- Shingle bundles
- 45 bundles
- Underlayment rolls (4 sq)
- 4 rolls
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 repair | $500 – $6,000 |
| 1 repair | $500 – $6,000 |
| 1 repair | $500 – $6,000 |
| 1 repair | $500 – $6,000 |
| 1 repair | $500 – $6,000 |
Based on Yakima pricing of $500–$5,950 per repair.
Cost by roof scope
Roof pricing moves on area, pitch, how many layers come off and what the deck looks like underneath. Every row is priced against the Yakima median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Overlay on a simple ranch roof | Single layer, 4:12 pitch, no tear-off | $1,100 – $1,400 |
| Standard tear-off and replace | One layer removed, architectural shingle, walkable pitch | $1,400 – $2,000 |
| Two-layer tear-off | Extra removal and disposal, same footprint | $1,700 – $2,300 |
| Steep or cut-up roof | 8:12+ pitch, multiple valleys, dormers, staging | $2,100 – $2,900 |
| Replacement with deck repair | Partial resheathing found after tear-off | $2,000 – $2,700 |
- • Tear-off and disposal is priced per layer — quotes that omit a second layer are the most common source of change orders.
- • Decking is unknown until the old roof is off. Reputable quotes state a per-sheet resheathing price up front.
- • Pitch above 7:12 requires fall protection and slows the crew, which shows up as labor, not material.
Basis: Each scope is priced as a multiple of the modeled Yakima median for roof repair, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| 3-Tab Asphalt Shingles | $1,000 – $1,500 | 12–20 yrs | Moderate |
| Architectural Asphalt Shingles | $1,400 – $2,000 | 22–30 yrs | Low |
Where the money goes
- Labor
- $1,200
- 61% of median
- Materials
- $500
- 26% of median
- Permit & fees
- $255
- 13% of median
Yakima project costs+24% vs U.S. average
Based on Yakima County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Yakima building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
Same day to 2 days, 1-3 weeks if a permit is needed
05
Inspection
Final inspection when permitted
06
Closeout
Final sign-off, warranty and documentation
Yakima labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$72–$94
Exterior crews in Yakima County · +21% vs U.S. ($68/hr)
Typical crew
2 × 1 day
On-site time for a typical roof repair job here.
Labor in the price
$1,200
68% of the median — the rest is material, disposal and permit.
Because labor is 68% of this job, Yakima wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Yakima County labor factor (x1.208). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Yakima differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$200
Yakima County crews price 21% above the national average, and labor is 68% of this job.
Code and inspection load+$75
Roof Repair carries 60% exposure to local code requirements, and this jurisdiction's review load indexes at x1.09.
Material and delivery+$50
Materials are nationally traded, so they move less — but delivery into this market runs 10% over baseline.
Permit fees+$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Yakima median against the U.S. median for this scope. · City of Yakima building department, Hometriva methodology
Yakima vs Washington vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated roof repair in Yakima
$1,955
Likely range $755 – $6,155
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Leak source and how much decking is wet
- Shingle, tile or metal covering
- Flashing, valley or penetration work
- Access and roof pitch
- Emergency versus scheduled service
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Yakima building departmentModeled estimate |
| electrical | City of Yakima building departmentModeled estimate |
| mechanical | City of Yakima building departmentModeled estimate |
| plumbing | City of Yakima building departmentModeled estimate |
| zoning | City of Yakima building departmentModeled estimate |
| fire | City of Yakima building departmentModeled estimate |
Permit requirement in Yakima
It depends on scope. Like-for-like cosmetic work in Yakima is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- City of Yakima building departmentModeled estimate
- Permit fee
- Estimated allowance $105–$400Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Final inspection when permitted
Local conditions that change this job
Only the exposures that materially affect roof repair.
Design wind speed exposure
High70/100
Named-storm exposure
High70/100
Annual rainfall
High74/100
Yakima sits in Yakima County, Washington. Snow load, hail and deep freeze-thaw cycling drive roofing, insulation and exterior envelope specifications well above Sun Belt minimums. Work outside city limits is permitted by the county building department rather than the city.
Owner-occupied homes
0%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
38,787
Approximate household count in Yakima, used to size the contractor pool for this trade.
Permit activity index
x1.15
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
What Yakima homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Yakima
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Yakima roof repair costs
Hometriva does not publish invented city prices. The Yakima estimate for roof repair is produced by this chain, and every input is stored separately:
- National baseline$1,400
Typical U.S. cost for roof repair on a single-family home.
- Local labor factorx1.208
Yakima-area trade labor rates, weighted at 68% of this job.
- Material factorx1.105
Material and delivery pricing into Yakima County, weighted at 32%.
- Regulatory factorx1.086
Local code, product-approval and inspection load, applied at 60% for this project type.
- Applied multiplierx1.236
Blended Yakima adjustment specific to roof repair.
- Permit component$105 – $400
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, roof repair in Yakima carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for roof repair pricing in Yakima, WA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
What is the Florida 25 percent roof rule?
When more than 25 percent of a roof section is repaired or replaced within any 12-month period, the Florida Building Code generally requires the entire roof section to be brought up to current code, which in practice means a full replacement.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.