Stucco Repair cost in Annapolis, MD

Annapolis, MD · updated August 2026

$4,600

Typical local cost

$1,000 – $17,700

Typical range

per sq ft repaired
$7.50 – $24.50

Installed, local pricing

Permit
It depends

$95 – $335 in fees

Typical timeline
2-6 days of work plus cure time

2-6 days of work plus cure time, 1-4 weeks with permitting

Calculate my stucco cost

Annapolis runs +11% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Annapolis is $4,600. The local adjustment for this trade is x1.107 — driven mainly by Anne Arundel County labor rates and 20% exposure to local code requirements.

Estimate your Annapolis job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Square footage

180 sq ft

With waste allowance
198 sq ft
Square yards
20
Perimeter (per area)
54 ft
Square meters
16.72

Priced for Annapolis (local adjustment x1.107).

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
175 sq ft repaired$1,300$4,300
225 sq ft repaired$1,700$5,500
300 sq ft repaired$2,300$7,400
375 sq ft repaired$2,800$9,200
500 sq ft repaired$3,800$12,300

Based on Annapolis pricing of $8–$25 per sq ft repaired.

Where the money goes

Labor
$2,500
52% of median
Materials
$2,100
44% of median
Permit & fees
$215
4% of median

Annapolis project costs+11% vs U.S. average

Based on Anne Arundel County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Annapolis building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    2-6 days of work plus cure time, 1-4 weeks with permitting

  5. 05

    Inspection

    Lath / wire inspection when re-lathing, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Annapolis labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$67–$87

Exterior crews in Anne Arundel County · +12% vs U.S. ($68/hr)

Typical crew

2 × 2 days

On-site time for a typical stucco job here.

Labor in the price

$2,500

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Annapolis wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Anne Arundel County labor factor (x1.117). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Annapolis differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$275Material and delivery$125Code and inspection load$50
Dollars of the Annapolis difference owned by each driver, versus the U.S. median for stucco repair.
  • Trade labor rates+$275

    Anne Arundel County crews price 12% above the national average, and labor is 55% of this job.

  • Material and delivery+$125

    Materials are nationally traded, so they move less — but delivery into this market runs 7% over baseline.

  • Code and inspection load+$50

    Stucco Repair carries 20% exposure to local code requirements, and this jurisdiction's review load indexes at x1.06.

Basis: Decomposition of the modeled Annapolis median against the U.S. median for this scope. · City of Annapolis building department, Hometriva methodology

Annapolis vs Maryland vs the U.S.

Annapolis$1,000$17,700Maryland average$1,000$18,200U.S. average$900$16,000
Modeled ranges for stucco repair. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated stucco repair in Annapolis

$4,815

Likely range $1,215$17,915

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Extent of delamination behind the visible crack
  • Whether lath and weather barrier need replacement
  • Two-story access and scaffolding
  • Color matching versus full re-coat
  • Underlying water intrusion repairs

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Annapolis building departmentModeled estimate
electricalCity of Annapolis building departmentModeled estimate
mechanicalCity of Annapolis building departmentModeled estimate
plumbingCity of Annapolis building departmentModeled estimate
zoningCity of Annapolis building departmentModeled estimate
fireCity of Annapolis building departmentModeled estimate

Permit requirement in Annapolis

It depends on scope. Like-for-like cosmetic work in Annapolis is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.

Permitting authority
City of Annapolis building departmentModeled estimate
Permit fee
Estimated allowance $95$335Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Lath / wire inspection when re-lathing
  2. Final inspection
Full Annapolis permit guide for stucco repair

Local conditions that change this job

Only the exposures that materially affect stucco repair.

Humidity

Severe84/100

Annual rainfall

High74/100

Coastal / salt-air exposure

Moderate45/100

Annapolis sits in Anne Arundel County, Maryland. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer sq ft repaired
Annapolis (this page)x1.107$4,600$7.50$24.50
Baltimorex1.099$4,600$7.50$24
Columbiax1.139$4,800$8$25
Silver Springx1.139$4,800$8$25

What Annapolis homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Annapolis

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Annapolis stucco costs

Hometriva does not publish invented city prices. The Annapolis estimate for stucco repair is produced by this chain, and every input is stored separately:

  1. National baseline$4,200

    Typical U.S. cost for stucco repair on a single-family home.

  2. Local labor factorx1.117

    Annapolis-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.066

    Material and delivery pricing into Anne Arundel County, weighted at 45%.

  4. Regulatory factorx1.057

    Local code, product-approval and inspection load, applied at 20% for this project type.

  5. Applied multiplierx1.107

    Blended Annapolis adjustment specific to stucco repair.

  6. Permit component$95 – $335

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, stucco repair in Annapolis carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for stucco repair pricing in Annapolis, MD.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

How long does stucco repair take?

2-6 days of work plus cure time, 1-4 weeks with permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are extent of delamination behind the visible crack; whether lath and weather barrier need replacement; two-story access and scaffolding.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages