Tile Installation cost in Gulfport, MS
Gulfport, MS · updated August 2026
$4,800
Typical local cost
$1,500 – $13,600
Typical range
- per sq ft installed
- $6 – $21.50
- Permit
- Usually no
- Typical timeline
- 3-7 days including cure time
Installed, local pricing
$0 – $120 in fees
3-7 days including cure time
Gulfport runs -15% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Gulfport is $4,800. The local adjustment for this trade is x0.853 — driven mainly by Harrison County labor rates and 5% exposure to local code requirements.
Estimate your Gulfport job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Tiles needed
57 tiles
Includes 12% waste
- Boxes to buy
- 8 boxes
- Thinset (50 lb bags)
- 2 bags
- Grout (25 lb bags)
- 1 bags
- Tile cost estimateMaterial only
- $239 – $860
Priced for Gulfport (local adjustment x0.853).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 200 sq ft installed | $1,200 – $4,300 |
| 275 sq ft installed | $1,700 – $5,900 |
| 350 sq ft installed | $2,100 – $7,500 |
| 450 sq ft installed | $2,700 – $9,700 |
| 600 sq ft installed | $3,600 – $12,900 |
Based on Gulfport pricing of $6–$22 per sq ft installed.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Porcelain Tile | $4,300 – $7,200 | 40–75 yrs | Low |
Where the money goes
- Labor
- $3,000
- 62% of median
- Materials
- $1,800
- 37% of median
- Permit & fees
- $60
- 1% of median
Gulfport project costs-15% vs U.S. average
Based on Harrison County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-7 days including cure time
05
Closeout
Final sign-off, warranty and documentation
Gulfport labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$41–$53
Interior crews in Harrison County · -19% vs U.S. ($58/hr)
Typical crew
2 × 4 days
On-site time for a typical tile job here.
Labor in the price
$3,000
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Gulfport wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Harrison County labor factor (x0.805). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Gulfport differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$675
Harrison County crews price 19% below the national average, and labor is 62% of this job.
Material and delivery-$150
Materials are nationally traded, so they move less — but delivery into this market runs 7% under baseline.
Basis: Decomposition of the modeled Gulfport median against the U.S. median for this scope. · City of Gulfport building department, Hometriva methodology
Gulfport vs Mississippi vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated tile installation in Gulfport
$4,860
Likely range $1,560 – $13,660
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Tile size and format — large format costs more to set
- Layout pattern and diagonal cuts
- Shower waterproofing membrane
- Substrate preparation and leveling
- Natural stone sealing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Gulfport building departmentModeled estimate |
| electrical | City of Gulfport building departmentModeled estimate |
| mechanical | City of Gulfport building departmentModeled estimate |
| plumbing | City of Gulfport building departmentModeled estimate |
| zoning | City of Gulfport building departmentModeled estimate |
| fire | City of Gulfport building departmentModeled estimate |
Permit requirement in Gulfport
A permit is usually not required for tile installation on its own. Gulfport still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Gulfport building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$120Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect tile installation.
Humidity
Severe84/100
Gulfport sits in Harrison County, Mississippi. Hurricane wind design, wind-borne debris protection and floodplain review add product-approval and inspection steps to most exterior work. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft installed |
|---|---|---|---|
| Gulfport (this page) | x0.853 | $4,800 | $6 – $21.50 |
| Biloxi | x0.821 | $4,600 | $5.50 – $20.50 |
| New Orleans | x1.064 | $6,000 | $7.50 – $26.50 |
| Hattiesburg | x0.821 | $4,600 | $5.50 – $20.50 |
What Gulfport homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Gulfport
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Gulfport tile costs
Hometriva does not publish invented city prices. The Gulfport estimate for tile installation is produced by this chain, and every input is stored separately:
- National baseline$5,600
Typical U.S. cost for tile installation on a single-family home.
- Local labor factorx0.805
Gulfport-area trade labor rates, weighted at 62% of this job.
- Material factorx0.932
Material and delivery pricing into Harrison County, weighted at 38%.
- Regulatory factorx0.984
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.853
Blended Gulfport adjustment specific to tile installation.
- Permit component$0 – $120
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, tile installation in Gulfport carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for tile installation pricing in Gulfport, MS.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How much extra tile should I order?
Order 10 percent extra for a straight layout and 15 to 20 percent for diagonal or herringbone patterns to cover cuts, breakage and future repairs from the same dye lot.
How long does tile installation take?
3-7 days including cure time. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are tile size and format — large format costs more to set; layout pattern and diagonal cuts; shower waterproofing membrane.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.