Tile Installation cost in Bellevue, NE
Bellevue, NE · updated August 2026
$5,000
Typical local cost
$1,600 – $14,300
Typical range
- per sq ft installed
- $6.50 – $22.50
- Permit
- Usually no
- Typical timeline
- 3-7 days including cure time
Installed, local pricing
$0 – $125 in fees
3-7 days including cure time
Bellevue runs -11% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Bellevue homeowners pay around $5,000. The local adjustment for this trade is x0.893 — driven mainly by Sarpy County labor rates and 5% exposure to local code requirements.
Estimate your Bellevue job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Tiles needed
57 tiles
Includes 12% waste
- Boxes to buy
- 8 boxes
- Thinset (50 lb bags)
- 2 bags
- Grout (25 lb bags)
- 1 bags
- Tile cost estimateMaterial only
- $249 – $897
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 200 sq ft installed | $1,300 – $4,500 |
| 275 sq ft installed | $1,800 – $6,200 |
| 350 sq ft installed | $2,300 – $7,900 |
| 450 sq ft installed | $2,900 – $10,100 |
| 600 sq ft installed | $3,900 – $13,500 |
Based on Bellevue pricing of $7–$23 per sq ft installed.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Porcelain Tile | $4,500 – $7,500 | 40–75 yrs | Low |
Where the money goes
- Labor
- $3,100
- 61% of median
- Materials
- $1,900
- 38% of median
- Permit & fees
- $65
- 1% of median
Bellevue project costs-11% vs U.S. average
Based on Sarpy County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-7 days including cure time
05
Closeout
Final sign-off, warranty and documentation
Bellevue labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$44–$57
Interior crews in Sarpy County · -14% vs U.S. ($58/hr)
Typical crew
2 × 4 days
On-site time for a typical tile job here.
Labor in the price
$3,100
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Bellevue wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Sarpy County labor factor (x0.857). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Bellevue differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$500
Sarpy County crews price 14% below the national average, and labor is 62% of this job.
Material and delivery-$100
Materials are nationally traded, so they move less — but delivery into this market runs 5% under baseline.
Basis: Decomposition of the modeled Bellevue median against the U.S. median for this scope. · City of Bellevue building department, Hometriva methodology
Bellevue vs Nebraska vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated tile installation in Bellevue
$5,065
Likely range $1,665 – $14,365
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Tile size and format — large format costs more to set
- Layout pattern and diagonal cuts
- Shower waterproofing membrane
- Substrate preparation and leveling
- Natural stone sealing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Bellevue building departmentModeled estimate |
| electrical | City of Bellevue building departmentModeled estimate |
| mechanical | City of Bellevue building departmentModeled estimate |
| plumbing | City of Bellevue building departmentModeled estimate |
| zoning | City of Bellevue building departmentModeled estimate |
| fire | City of Bellevue building departmentModeled estimate |
Permit requirement in Bellevue
Usually no permit is required in Bellevue, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Bellevue building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$125Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect tile installation.
Humidity
Severe84/100
Bellevue sits in Sarpy County, Nebraska. Freeze-thaw cycling, frost-depth footings and an older housing stock keep foundation, sewer and window work in steady rotation. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft installed |
|---|---|---|---|
| Bellevue (this page) | x0.893 | $5,000 | $6.50 – $22.50 |
| Lincoln | x0.914 | $5,100 | $6.50 – $23 |
| Grand Island | x0.863 | $4,800 | $6 – $21.50 |
| Kearney | x0.863 | $4,800 | $6 – $21.50 |
What Bellevue homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Bellevue
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Bellevue tile costs
Hometriva does not publish invented city prices. The Bellevue estimate for tile installation is produced by this chain, and every input is stored separately:
- National baseline$5,600
Typical U.S. cost for tile installation on a single-family home.
- Local labor factorx0.857
Bellevue-area trade labor rates, weighted at 62% of this job.
- Material factorx0.954
Material and delivery pricing into Sarpy County, weighted at 38%.
- Regulatory factorx0.989
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.893
Blended Bellevue adjustment specific to tile installation.
- Permit component$0 – $125
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, tile installation in Bellevue carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for tile installation pricing in Bellevue, NE.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How much extra tile should I order?
Order 10 percent extra for a straight layout and 15 to 20 percent for diagonal or herringbone patterns to cover cuts, breakage and future repairs from the same dye lot.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.