Tile Installation cost in Rapid City, SD
Rapid City, SD · updated August 2026
$5,100
Typical local cost
$1,600 – $14,400
Typical range
- per sq ft installed
- $6.50 – $22.50
- Permit
- Usually no
- Typical timeline
- 3-7 days including cure time
Installed, local pricing
$0 – $120 in fees
3-7 days including cure time
Rapid City runs -10% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Rapid City homeowners pay around $5,100. The local adjustment for this trade is x0.903 — driven mainly by Pennington County labor rates and 5% exposure to local code requirements.
Estimate your Rapid City job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Tiles needed
57 tiles
Includes 12% waste
- Boxes to buy
- 8 boxes
- Thinset (50 lb bags)
- 2 bags
- Grout (25 lb bags)
- 1 bags
- Tile cost estimateMaterial only
- $252 – $907
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 200 sq ft installed | $1,300 – $4,500 |
| 275 sq ft installed | $1,800 – $6,200 |
| 350 sq ft installed | $2,300 – $7,900 |
| 450 sq ft installed | $2,900 – $10,100 |
| 600 sq ft installed | $3,900 – $13,500 |
Based on Rapid City pricing of $7–$23 per sq ft installed.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Porcelain Tile | $4,600 – $7,700 | 40–75 yrs | Low |
Where the money goes
- Labor
- $3,200
- 62% of median
- Materials
- $1,900
- 37% of median
- Permit & fees
- $60
- 1% of median
Rapid City project costs-10% vs U.S. average
Based on Pennington County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-7 days including cure time
05
Closeout
Final sign-off, warranty and documentation
Rapid City labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$44–$58
Interior crews in Pennington County · -13% vs U.S. ($58/hr)
Typical crew
2 × 4 days
On-site time for a typical tile job here.
Labor in the price
$3,200
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Rapid City wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Pennington County labor factor (x0.870). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Rapid City differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$450
Pennington County crews price 13% below the national average, and labor is 62% of this job.
Material and delivery-$75
Materials are nationally traded, so they move less — but delivery into this market runs 4% under baseline.
Basis: Decomposition of the modeled Rapid City median against the U.S. median for this scope. · City of Rapid City building department, Hometriva methodology
Rapid City vs South Dakota vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated tile installation in Rapid City
$5,160
Likely range $1,660 – $14,460
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Tile size and format — large format costs more to set
- Layout pattern and diagonal cuts
- Shower waterproofing membrane
- Substrate preparation and leveling
- Natural stone sealing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Rapid City building departmentModeled estimate |
| electrical | City of Rapid City building departmentModeled estimate |
| mechanical | City of Rapid City building departmentModeled estimate |
| plumbing | City of Rapid City building departmentModeled estimate |
| zoning | City of Rapid City building departmentModeled estimate |
| fire | City of Rapid City building departmentModeled estimate |
Permit requirement in Rapid City
Usually no permit is required in Rapid City, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Rapid City building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$120Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect tile installation.
Humidity
Severe84/100
Rapid City sits in Pennington County, South Dakota. Snow load, hail and deep freeze-thaw cycling drive roofing, insulation and exterior envelope specifications well above Sun Belt minimums. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft installed |
|---|---|---|---|
| Rapid City (this page) | x0.903 | $5,100 | $6.50 – $22.50 |
| Sioux Falls | x0.924 | $5,200 | $6.50 – $23 |
| Aberdeen | x0.872 | $4,900 | $6 – $22 |
| Brookings | x0.872 | $4,900 | $6 – $22 |
What Rapid City homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Rapid City
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Rapid City tile costs
Hometriva does not publish invented city prices. The Rapid City estimate for tile installation is produced by this chain, and every input is stored separately:
- National baseline$5,600
Typical U.S. cost for tile installation on a single-family home.
- Local labor factorx0.870
Rapid City-area trade labor rates, weighted at 62% of this job.
- Material factorx0.960
Material and delivery pricing into Pennington County, weighted at 38%.
- Regulatory factorx0.984
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.903
Blended Rapid City adjustment specific to tile installation.
- Permit component$0 – $120
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, tile installation in Rapid City carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for tile installation pricing in Rapid City, SD.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How much extra tile should I order?
Order 10 percent extra for a straight layout and 15 to 20 percent for diagonal or herringbone patterns to cover cuts, breakage and future repairs from the same dye lot.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.