Tile Installation cost in Alexandria, VA

Alexandria, VA · updated August 2026

$5,900

Typical local cost

$1,900 – $17,000

Typical range

per sq ft installed
$7.50 – $26.50

Installed, local pricing

Permit
Usually no

$0 – $155 in fees

Typical timeline
3-7 days including cure time

3-7 days including cure time

Calculate my tile cost

Alexandria runs +6% against the U.S. average · data confidence High · modeled estimate, not a quote

The modeled midpoint for Alexandria is $5,900. The local adjustment for this trade is x1.060 — driven mainly by Alexandria County labor rates and 5% exposure to local code requirements.

Estimate your Alexandria job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Tiles needed

57 tiles

Includes 12% waste

Boxes to buy
8 boxes
Thinset (50 lb bags)
2 bags
Grout (25 lb bags)
1 bags
Tile cost estimateMaterial only
$297 – $1,068

Priced for Alexandria (local adjustment x1.060).

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
200 sq ft installed$1,500$5,300
275 sq ft installed$2,100$7,300
350 sq ft installed$2,600$9,300
450 sq ft installed$3,400$11,900
600 sq ft installed$4,500$15,900

Based on Alexandria pricing of $8–$27 per sq ft installed.

Cost by material

Installed cost in this market, with expected service life.

MaterialInstalled rangeLifespanMaintenance
Porcelain Tile$5,300 $8,9004075 yrsLow

Where the money goes

Labor
$3,700
62% of median
Materials
$2,200
37% of median
Permit & fees
$80
1% of median

Alexandria project costs+6% vs U.S. average

Based on Alexandria County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Scheduling

    No permit typically required for this scope

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    3-7 days including cure time

  5. 05

    Closeout

    Final sign-off, warranty and documentation

Alexandria labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$54–$70

Interior crews in Alexandria County · +6% vs U.S. ($58/hr)

Typical crew

2 × 3.5 days

On-site time for a typical tile job here.

Labor in the price

$3,700

62% of the median — the rest is material, disposal and permit.

Because labor is 62% of this job, Alexandria wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national interior crew rates adjusted by the Alexandria County labor factor (x1.065). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Alexandria differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$225Material and delivery$100
Dollars of the Alexandria difference owned by each driver, versus the U.S. median for tile installation.
  • Trade labor rates+$225

    Alexandria County crews price 6% above the national average, and labor is 62% of this job.

  • Material and delivery+$100

    Materials are nationally traded, so they move less — but delivery into this market runs 4% over baseline.

Basis: Decomposition of the modeled Alexandria median against the U.S. median for this scope. · City of Alexandria building department, Hometriva methodology

Alexandria vs Virginia vs the U.S.

Alexandria$1,900$17,000Virginia average$1,900$16,600U.S. average$1,800$16,000
Modeled ranges for tile installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated tile installation in Alexandria

$5,980

Likely range $1,980$17,080

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Tile size and format — large format costs more to set
  • Layout pattern and diagonal cuts
  • Shower waterproofing membrane
  • Substrate preparation and leveling
  • Natural stone sealing

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Alexandria building departmentModeled estimate
electricalCity of Alexandria building departmentModeled estimate
mechanicalCity of Alexandria building departmentModeled estimate
plumbingCity of Alexandria building departmentModeled estimate
zoningCity of Alexandria building departmentModeled estimate
fireCity of Alexandria building departmentModeled estimate

Permit requirement in Alexandria

A permit is usually not required for tile installation on its own. Alexandria still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.

Permitting authority
City of Alexandria building departmentModeled estimate
Permit fee
Estimated allowance $0$155Modeled from comparable fee schedules — not an official quoted fee.
Full Alexandria permit guide for tile installation

Local conditions that change this job

Only the exposures that materially affect tile installation.

Humidity

Severe84/100

Alexandria sits in Alexandria County, Virginia. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer sq ft installed
Alexandria (this page)x1.060$5,900$7.50$26.50
Arlingtonx1.060$5,900$7.50$26.50
Washingtonx1.237$6,900$8.50$31
Silver Springx1.132$6,300$8$28.50

What Alexandria homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Alexandria

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Alexandria tile costs

Hometriva does not publish invented city prices. The Alexandria estimate for tile installation is produced by this chain, and every input is stored separately:

  1. National baseline$5,600

    Typical U.S. cost for tile installation on a single-family home.

  2. Local labor factorx1.065

    Alexandria-area trade labor rates, weighted at 62% of this job.

  3. Material factorx1.044

    Material and delivery pricing into Alexandria County, weighted at 38%.

  4. Regulatory factorx1.051

    Local code, product-approval and inspection load, applied at 5% for this project type.

  5. Applied multiplierx1.060

    Blended Alexandria adjustment specific to tile installation.

  6. Permit component$0 – $155

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, tile installation in Alexandria carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for tile installation pricing in Alexandria, VA.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

How much extra tile should I order?

Order 10 percent extra for a straight layout and 15 to 20 percent for diagonal or herringbone patterns to cover cuts, breakage and future repairs from the same dye lot.

How long does tile installation take?

3-7 days including cure time. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are tile size and format — large format costs more to set; layout pattern and diagonal cuts; shower waterproofing membrane.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages