Tile Installation cost in Yakima, WA
Yakima, WA · updated August 2026
$6,600
Typical local cost
$2,100 – $18,800
Typical range
- per sq ft installed
- $8 – $29.50
- Permit
- Usually no
- Typical timeline
- 3-7 days including cure time
Installed, local pricing
$0 – $175 in fees
3-7 days including cure time
Yakima runs +17% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Yakima is $6,600. The local adjustment for this trade is x1.174 — driven mainly by Yakima County labor rates and 5% exposure to local code requirements.
Estimate your Yakima job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Tiles needed
57 tiles
Includes 12% waste
- Boxes to buy
- 8 boxes
- Thinset (50 lb bags)
- 2 bags
- Grout (25 lb bags)
- 1 bags
- Tile cost estimateMaterial only
- $329 – $1,183
Priced for Yakima (local adjustment x1.174).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 200 sq ft installed | $1,600 – $5,900 |
| 275 sq ft installed | $2,200 – $8,100 |
| 350 sq ft installed | $2,800 – $10,300 |
| 450 sq ft installed | $3,600 – $13,300 |
| 600 sq ft installed | $4,800 – $17,700 |
Based on Yakima pricing of $8–$30 per sq ft installed.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Porcelain Tile | $5,900 – $9,900 | 40–75 yrs | Low |
Where the money goes
- Labor
- $4,100
- 61% of median
- Materials
- $2,500
- 37% of median
- Permit & fees
- $90
- 1% of median
Yakima project costs+17% vs U.S. average
Based on Yakima County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-7 days including cure time
05
Closeout
Final sign-off, warranty and documentation
Yakima labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$62–$80
Interior crews in Yakima County · +21% vs U.S. ($58/hr)
Typical crew
2 × 3.5 days
On-site time for a typical tile job here.
Labor in the price
$4,100
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Yakima wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Yakima County labor factor (x1.208). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Yakima differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$725
Yakima County crews price 21% above the national average, and labor is 62% of this job.
Material and delivery+$225
Materials are nationally traded, so they move less — but delivery into this market runs 10% over baseline.
Basis: Decomposition of the modeled Yakima median against the U.S. median for this scope. · City of Yakima building department, Hometriva methodology
Yakima vs Washington vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated tile installation in Yakima
$6,690
Likely range $2,190 – $18,890
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Tile size and format — large format costs more to set
- Layout pattern and diagonal cuts
- Shower waterproofing membrane
- Substrate preparation and leveling
- Natural stone sealing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Yakima building departmentModeled estimate |
| electrical | City of Yakima building departmentModeled estimate |
| mechanical | City of Yakima building departmentModeled estimate |
| plumbing | City of Yakima building departmentModeled estimate |
| zoning | City of Yakima building departmentModeled estimate |
| fire | City of Yakima building departmentModeled estimate |
Permit requirement in Yakima
A permit is usually not required for tile installation on its own. Yakima still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Yakima building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$175Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect tile installation.
Humidity
Severe84/100
Nearby market comparison
+ Had tile installation done in Yakima? Add what you paid or were quoted
Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.
How Hometriva estimates Yakima tile costs
Hometriva does not publish invented city prices. The Yakima estimate for tile installation is produced by this chain, and every input is stored separately:
- National baseline$5,600
Typical U.S. cost for tile installation on a single-family home.
- Local labor factorx1.208
Yakima-area trade labor rates, weighted at 62% of this job.
- Material factorx1.105
Material and delivery pricing into Yakima County, weighted at 38%.
- Regulatory factorx1.086
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.174
Blended Yakima adjustment specific to tile installation.
- Permit component$0 – $175
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, tile installation in Yakima carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for tile installation pricing in Yakima, WA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How much extra tile should I order?
Order 10 percent extra for a straight layout and 15 to 20 percent for diagonal or herringbone patterns to cover cuts, breakage and future repairs from the same dye lot.
How long does tile installation take?
3-7 days including cure time. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are tile size and format — large format costs more to set; layout pattern and diagonal cuts; shower waterproofing membrane.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.