Water Heater Replacement cost in Concord, NH
Concord, NH · updated August 2026
$2,300
Typical local cost
$1,300 – $5,800
Typical range
- per installed unit
- $1,300 – $5,850
- Permit
- Yes
- Typical timeline
- 2-5 hours of work
Installed, local pricing
$60 – $190 in fees
2-5 hours of work, under 2 weeks including permit and inspection
Concord runs +8% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Concord homeowners pay around $2,300. The local adjustment for this trade is x1.080 — driven mainly by Merrimack County labor rates and 55% exposure to local code requirements.
Estimate your Concord job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Installed cost estimate
$1,795 – $2,640
- 10-year cost of ownershipPurchase plus energy
- $7,832
- Permit + code upgrades
- $517
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 installed unit | $1,300 – $5,900 |
| 1 installed unit | $1,300 – $5,900 |
| 1 installed unit | $1,300 – $5,900 |
| 1 installed unit | $1,300 – $5,900 |
| 1 installed unit | $1,300 – $5,900 |
Based on Concord pricing of $1,300–$5,850 per installed unit.
Cost by water heater scenario
Fuel type and whether the install changes venting, gas or electrical service set the price. Every row is priced against the Concord median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Tank swap, same fuel and size | Existing connections and venting reused | $1,400 – $2,000 |
| Larger tank or relocation | New connections, pan and drain | $2,100 – $2,800 |
| Gas tankless conversion | New gas line sizing and dedicated venting | $3,500 – $5,100 |
| Heat pump water heater | Electrical circuit, condensate drain, clearance space | $3,200 – $4,600 |
| Code-required upgrades on replacement | Expansion tank, seismic or pan requirements | $1,700 – $2,500 |
- • Tankless conversion is a gas and venting project as much as a plumbing one, which is where the cost gap comes from.
- • Expansion tanks, drain pans and shutoff valves are frequently required at replacement even when the old install lacked them.
Basis: Each scope is priced as a multiple of the modeled Concord median for water heater replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Tankless Water Heater | $3,500 – $5,800 | 18–25 yrs | Moderate |
| Tank Water Heater | $1,700 – $3,000 | 8–12 yrs | Low |
Where the money goes
- Labor
- $1,400
- 58% of median
- Materials
- $900
- 37% of median
- Permit & fees
- $125
- 5% of median
Concord project costs+8% vs U.S. average
Based on Merrimack County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Concord building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-5 hours of work, under 2 weeks including permit and inspection
05
Inspection
Plumbing / final inspection, Electrical or gas inspection where applicable
06
Closeout
Final sign-off, warranty and documentation
Concord labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$101–$131
Plumbing crews in Merrimack County · +9% vs U.S. ($105/hr)
Typical crew
2 × 1 day
On-site time for a typical water heater job here.
Labor in the price
$1,400
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Concord wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Merrimack County labor factor (x1.091). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Concord differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$125
Merrimack County crews price 9% above the national average, and labor is 62% of this job.
Material and delivery+$50
Materials are nationally traded, so they move less — but delivery into this market runs 5% over baseline.
Basis: Decomposition of the modeled Concord median against the U.S. median for this scope. · City of Concord building department, Hometriva methodology
Concord vs New Hampshire vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated water heater replacement in Concord
$2,425
Likely range $1,425 – $5,925
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Tank versus tankless (tankless usually needs gas or electrical upgrades)
- Capacity in gallons and recovery rate
- Garage, attic or interior closet location
- Code upgrades: pan, drain line, expansion tank, seismic or hurricane strapping
- Removal and disposal of the old unit
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Concord building departmentModeled estimate |
| electrical | City of Concord building departmentModeled estimate |
| mechanical | City of Concord building departmentModeled estimate |
| plumbing | City of Concord building departmentModeled estimate |
| zoning | City of Concord building departmentModeled estimate |
| fire | City of Concord building departmentModeled estimate |
Permit requirement in Concord
Yes — a permit is required for water heater replacement in Concord, NH. The work must be inspected before it can be closed out, and a homeowner may be able to pull an owner-builder permit on a home they own and occupy.
- Permitting authority
- City of Concord building departmentModeled estimate
- Permit fee
- Estimated allowance $60–$190Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Plumbing / final inspection
- Electrical or gas inspection where applicable
Local conditions that change this job
Only the exposures that materially affect water heater replacement.
Humidity
Severe84/100
Concord sits in Merrimack County, New Hampshire. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per installed unit |
|---|---|---|---|
| Concord (this page) | x1.080 | $2,300 | $1,300 – $5,850 |
| Manchester | x1.120 | $2,400 | $1,350 – $6,050 |
| Nashua | x1.120 | $2,400 | $1,350 – $6,050 |
| Dover | x1.080 | $2,300 | $1,300 – $5,850 |
What Concord homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Concord
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Concord water heater costs
Hometriva does not publish invented city prices. The Concord estimate for water heater replacement is produced by this chain, and every input is stored separately:
- National baseline$2,150
Typical U.S. cost for water heater replacement on a single-family home.
- Local labor factorx1.091
Concord-area trade labor rates, weighted at 62% of this job.
- Material factorx1.055
Material and delivery pricing into Merrimack County, weighted at 38%.
- Regulatory factorx1.004
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.080
Blended Concord adjustment specific to water heater replacement.
- Permit component$60 – $190
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, water heater replacement in Concord carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for water heater replacement pricing in Concord, NH.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to replace a water heater?
Yes. Florida jurisdictions require a plumbing permit for a water heater changeout because the work involves gas or electrical connections, temperature and pressure relief piping, and drainage. Replacing without a permit can cause insurance and resale problems.
Can I replace my own water heater?
A homeowner can pull an owner-builder permit and replace a water heater in a home they own and occupy. Electrical and gas connections must still pass inspection.
How long does a water heater last?
Standard tank units last 8-12 years; tankless units often reach 15-20 years with annual descaling. Florida's hard water shortens tank life in many areas.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.