Whole-House Repipe cost in Concord, NH
Concord, NH · updated August 2026
$8,900
Typical local cost
$4,900 – $17,300
Typical range
- per house repiped
- $4,850 – $17,350
- Permit
- Yes
- Typical timeline
- 3-6 days of work
Installed, local pricing
$105 – $390 in fees
3-6 days of work, 2-5 weeks including inspections and drywall repair
Concord runs +8% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Concord homeowners pay around $8,900. The local adjustment for this trade is x1.083 — driven mainly by Merrimack County labor rates and 55% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 house repiped | $4,900 – $17,400 |
| 1 house repiped | $4,900 – $17,400 |
| 1 house repiped | $4,900 – $17,400 |
| 1 house repiped | $4,900 – $17,400 |
| 1 house repiped | $4,900 – $17,400 |
Based on Concord pricing of $4,850–$17,350 per house repiped.
Where the money goes
- Labor
- $6,200
- 68% of median
- Materials
- $2,700
- 30% of median
- Permit & fees
- $250
- 3% of median
Concord project costs+8% vs U.S. average
Based on Merrimack County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Concord building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-6 days of work, 2-5 weeks including inspections and drywall repair
05
Inspection
Rough plumbing / pressure test, Drywall patch, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Concord labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$101–$131
Plumbing crews in Merrimack County · +9% vs U.S. ($105/hr)
Typical crew
3 × 2.5 days
On-site time for a typical repipe job here.
Labor in the price
$6,200
70% of the median — the rest is material, disposal and permit.
Because labor is 70% of this job, Concord wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Merrimack County labor factor (x1.091). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Concord differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$525
Merrimack County crews price 9% above the national average, and labor is 70% of this job.
Material and delivery+$125
Materials are nationally traded, so they move less — but delivery into this market runs 5% over baseline.
Permit fees-$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Concord median against the U.S. median for this scope. · City of Concord building department, Hometriva methodology
Concord vs New Hampshire vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated whole-house repipe in Concord
$9,150
Likely range $5,150 – $17,550
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number of bathrooms and fixtures
- Slab versus attic routing
- PEX versus CPVC versus copper
- Drywall cutting and patching
- House square footage and stories
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Concord building departmentModeled estimate |
| electrical | City of Concord building departmentModeled estimate |
| mechanical | City of Concord building departmentModeled estimate |
| plumbing | City of Concord building departmentModeled estimate |
| zoning | City of Concord building departmentModeled estimate |
| fire | City of Concord building departmentModeled estimate |
Permit requirement in Concord
Yes — a permit is required for whole-house repipe in Concord, NH. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Concord building departmentModeled estimate
- Permit fee
- Estimated allowance $105–$390Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Rough plumbing / pressure test
- Drywall patch
- Final inspection
Local conditions that change this job
Only the exposures that materially affect whole-house repipe.
Humidity
Severe84/100
Concord sits in Merrimack County, New Hampshire. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.
Owner-occupied homes
0%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
17,600
Approximate household count in Concord, used to size the contractor pool for this trade.
Permit activity index
x0.87
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per house repiped |
|---|---|---|---|
| Concord (this page) | x1.083 | $8,900 | $4,850 – $17,350 |
| Manchester | x1.124 | $9,200 | $5,050 – $18,000 |
| Nashua | x1.124 | $9,200 | $5,050 – $18,000 |
| Dover | x1.083 | $8,900 | $4,850 – $17,350 |
What Concord homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Concord
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Concord repipe costs
Hometriva does not publish invented city prices. The Concord estimate for whole-house repipe is produced by this chain, and every input is stored separately:
- National baseline$8,200
Typical U.S. cost for whole-house repipe on a single-family home.
- Local labor factorx1.091
Concord-area trade labor rates, weighted at 70% of this job.
- Material factorx1.055
Material and delivery pricing into Merrimack County, weighted at 30%.
- Regulatory factorx1.004
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.083
Blended Concord adjustment specific to whole-house repipe.
- Permit component$105 – $390
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, whole-house repipe in Concord carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for whole-house repipe pricing in Concord, NH.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to repipe a house?
Yes. A whole-house repipe is major plumbing work and requires a permit, a pressure test inspection and a final inspection in every Florida jurisdiction.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.