Georgia · Outdoor
Driveway Replacement cost in Georgia
Statewide pricing, permit posture and inspection sequence for driveway replacement in Georgia. Your city or county issues the actual permit — use the local links below to confirm fees.
Model reviewed August 2026
Driveway Replacement cost in Georgia
$4,000 – $18,100
Most Georgia homeowners pay around $8,200, or $5.50–$21 per sq ft of driveway. Permit fees typically add $70–$315.
Permit: Usually yes. Georgia State Minimum Standard Codes, based on the IRC
Cost breakdown
| Budget scope | $4,000 |
|---|---|
| Typical project | $8,200 |
| Premium / complex | $18,100 |
| per sq ft of driveway | $5.50 – $21 |
| Permit fees | $70 – $315 |
| vs national baseline | -5% |
| Timeline | 2-4 days of work plus 7 days of concrete cure, 2-5 weeks total |
What is different about driveway replacement in Georgia
Metro Atlanta permit review times run far longer than the rest of the state; coastal Chatham and Glynn counties add wind and flood requirements inland counties skip.
Owner-builder: Homeowner permits allowed on owner-occupied property in most jurisdictions. Driveway Replacement is one of the scopes a homeowner can more realistically permit themselves.
Inspections
- Form / subgrade inspection
- Final inspection
What drives the price
- Square footage and thickness
- Concrete versus pavers versus asphalt
- Demolition and haul-off of the old surface
- Base preparation and drainage
- Apron work in the public right-of-way
Driveway pricing by city
Permit difficulty by city
Hometriva Permit Complexity Index: review load, added discipline reviews, wind and flood overlays, and how each jurisdiction sets fees.
| City | Complexity | Review time | Inspections |
|---|---|---|---|
| Atlanta | 45/100 · Moderate | 4–14 days | 2 |
| Augusta | 58/100 · Complex | 5–18 days | 2 |
| Columbus | 58/100 · Complex | 5–18 days | 2 |
| Savannah | 58/100 · Complex | 5–18 days | 2 |
| Athens | 58/100 · Complex | 5–18 days | 2 |
| Sandy Springs | 58/100 · Complex | 5–18 days | 2 |
| Roswell | 58/100 · Complex | 5–18 days | 2 |
| Macon | 58/100 · Complex | 5–18 days | 2 |
| Johns Creek | 58/100 · Complex | 5–18 days | 2 |
| Marietta | 58/100 · Complex | 5–18 days | 2 |
What Georgia homeowners reported paying
Invoice amounts submitted for this state, shown beside the model.
Rebates and incentives in Georgia
What is still claimable, what expired, and where to check your own utility territory.
Federally funded, state-administered rebates for heat pumps, panel and wiring upgrades, insulation and whole-home retrofits. Availability, income tiers and funding depend entirely on the state program and can pause when a state's allocation runs out.
U.S. DOE — Home Energy Rebates- DSIRE — every Georgia incentive by ZIPThe N.C. Clean Energy Technology Center database. The authoritative list of state, utility and local programs.
- ENERGY STAR rebate finderUtility and manufacturer rebates by ZIP code for HVAC, water heating and appliances.
- DOE Home Energy Rebates — Georgia statusShows whether the state's HEAR/HOMES program is open, waitlisted or not yet launched.
Frequently asked questions
How long does driveway replacement take?
2-4 days of work plus 7 days of concrete cure, 2-5 weeks total. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are square footage and thickness; concrete versus pavers versus asphalt; demolition and haul-off of the old surface.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.