Utah · Exterior
Roof Replacement cost in Utah
Statewide pricing, permit posture and inspection sequence for roof replacement in Utah. Your city or county issues the actual permit — use the local links below to confirm fees.
Model reviewed August 2026
Roof Replacement cost in Utah
$9,400 – $31,800
Most Utah homeowners pay around $16,300, or $5.50–$14 per sq ft of roof area. Permit fees typically add $160–$675.
Permit: Yes. Utah State Construction Code, based on the IRC
Cost breakdown
| Budget scope | $9,400 |
|---|---|
| Typical project | $16,300 |
| Premium / complex | $31,800 |
| per sq ft of roof area | $5.50 – $14 |
| Permit fees | $160 – $675 |
| vs national baseline | -1% |
| Timeline | 1-3 days of work, 2-6 weeks including permitting and inspections |
What is different about roof replacement in Utah
A single statewide code with limited local amendment keeps requirements predictable; seismic detailing along the Wasatch Front is the main added scope.
Owner-builder: Homeowner permits allowed on owner-occupied property. Roof Replacement generally requires a licensed contractor to pull the permit, even where owner-builder status is available.
Inspections
- Dry-in / underlayment
- In-progress nailing
- Final roof inspection
What drives the price
- Roof size in squares (1 square = 100 sq ft) and pitch
- Material: 3-tab shingle, architectural shingle, metal, or tile
- Number of tear-off layers and any decking replacement
- Wind-uplift requirements in your county
- Skylights, valleys, dormers and other penetrations
Roof pricing by city
Permit difficulty by city
Hometriva Permit Complexity Index: review load, added discipline reviews, wind and flood overlays, and how each jurisdiction sets fees.
| City | Complexity | Review time | Inspections |
|---|---|---|---|
| Salt Lake City | 54/100 · Moderate | 5–17 days | 3 |
| West Valley City | 67/100 · Complex | 6–21 days | 3 |
| Provo | 67/100 · Complex | 6–21 days | 3 |
| West Jordan | 67/100 · Complex | 6–21 days | 3 |
| Orem | 67/100 · Complex | 6–21 days | 3 |
| Sandy | 67/100 · Complex | 6–21 days | 3 |
| St. George | 67/100 · Complex | 6–21 days | 3 |
| Ogden | 67/100 · Complex | 6–21 days | 3 |
| Lehi | 67/100 · Complex | 6–21 days | 3 |
What Utah homeowners reported paying
Invoice amounts submitted for this state, shown beside the model.
Rebates and incentives in Utah
What is still claimable, what expired, and where to check your own utility territory.
Federally funded, state-administered rebates for heat pumps, panel and wiring upgrades, insulation and whole-home retrofits. Availability, income tiers and funding depend entirely on the state program and can pause when a state's allocation runs out.
U.S. DOE — Home Energy RebatesCoastal and hurricane-exposed states run grant or matching programs for fortified roofs, impact-rated openings and wind-mitigation retrofits, usually through the state insurance department rather than the energy office. Insurers commonly discount premiums for the same upgrades.
IBHS — FORTIFIED program- DSIRE — every Utah incentive by ZIPThe N.C. Clean Energy Technology Center database. The authoritative list of state, utility and local programs.
- ENERGY STAR rebate finderUtility and manufacturer rebates by ZIP code for HVAC, water heating and appliances.
- DOE Home Energy Rebates — Utah statusShows whether the state's HEAR/HOMES program is open, waitlisted or not yet launched.
Frequently asked questions
How long does a roof replacement take?
Most single-family asphalt shingle roofs are torn off and re-covered in one to three working days. Tile and metal roofs typically take three to seven days. The overall timeline, including permit issuance and final inspection, is usually two to six weeks.
Do I need a permit for roof replacement in Utah?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does roof replacement take?
1-3 days of work, 2-6 weeks including permitting and inspections. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are roof size in squares (1 square = 100 sq ft) and pitch; material: 3-tab shingle, architectural shingle, metal, or tile; number of tear-off layers and any decking replacement.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.