Northeast
Kitchen Cabinet Refacing in Prince George's County, Maryland
Permit requirements, inspections and modeled costs for kitchen cabinet refacing in unincorporated Prince George's County. If your address falls inside a city, the municipal building department issues the permit instead.
Model reviewed August 2026
Do you need a permit for kitchen cabinet refacing in Prince George's County?
Usually no
A permit is usually not required for kitchen cabinet refacing on its own. Unincorporated Prince George's County still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
Budget $5,200 – $23,000 for the work itself (typically $10,900) plus a modeled $0–$165 permit allowance. Dollar figures are modeled, not quoted.
Permit authority: Prince George's County building departmentModeled estimate for unincorporated addresses.
Prince George's County cost model
| Budget scope | $5,200 |
|---|---|
| Typical project | $10,900 |
| Premium / complex | $23,000 |
| per linear foot of cabinetry | $250 – $750 |
| Permit feesModeled allowance | $0 – $165 |
| vs national baseline | +15% |
| Timeline | 3-5 days of work |
Cities inside the county that permit their own work
If the property is inside these municipalities, apply to the city rather than the county.
We track 1 municipalities in Prince George's County: Upper Marlboro. Contact the city directly if your address is inside one of them.
Statewide rules that apply here
Prince George's County follows Maryland's statewide code basis (Maryland Building Performance Standards, based on the IRC). Local amendments can add requirements but cannot reduce the statewide minimum.
Frequently asked questions
Is cabinet refacing worth it?
Refacing makes sense when the existing boxes are solid and the layout works. If the boxes are particleboard that has swollen from moisture, or you want to change the layout, full replacement is the better value.
How long does kitchen cabinet refacing take?
3-5 days of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are linear feet of cabinetry and door count; veneer, thermofoil or solid wood fronts; new soft-close hardware.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.