North Dakota · Interior
Tile Installation cost in North Dakota
Statewide pricing, permit posture and inspection sequence for tile installation in North Dakota. Your city or county issues the actual permit — use the local links below to confirm fees.
Model reviewed August 2026
Tile Installation cost in North Dakota
$1,800 – $15,800
Most North Dakota homeowners pay around $5,500, or $7–$24.50 per sq ft installed. Permit fees typically add $0–$125.
Permit: Usually no. North Dakota State Building Code, based on the IRC where adopted
Cost breakdown
| Budget scope | $1,800 |
|---|---|
| Typical project | $5,500 |
| Premium / complex | $15,800 |
| per sq ft installed | $7 – $24.50 |
| Permit fees | $0 – $125 |
| vs national baseline | -2% |
| Timeline | 3-7 days including cure time |
What is different about tile installation in North Dakota
Frost depth and wind exposure set structural minimums; outside the four largest cities many townships have limited permit review.
Owner-builder: Owner-builder permits common. Tile Installation is one of the scopes a homeowner can more realistically permit themselves.
What drives the price
- Tile size and format — large format costs more to set
- Layout pattern and diagonal cuts
- Shower waterproofing membrane
- Substrate preparation and leveling
- Natural stone sealing
Tile pricing by city
Permit difficulty by city
Hometriva Permit Complexity Index: review load, added discipline reviews, wind and flood overlays, and how each jurisdiction sets fees.
| City | Complexity | Review time | Inspections |
|---|---|---|---|
| Fargo | 31/100 · Simple | 3–10 days | 0 |
| Bismarck | 31/100 · Simple | 3–10 days | 0 |
| Grand Forks | 31/100 · Simple | 3–10 days | 0 |
| Minot | 31/100 · Simple | 3–10 days | 0 |
What North Dakota homeowners reported paying
Invoice amounts submitted for this state, shown beside the model.
Rebates and incentives in North Dakota
What is still claimable, what expired, and where to check your own utility territory.
Federally funded, state-administered rebates for heat pumps, panel and wiring upgrades, insulation and whole-home retrofits. Availability, income tiers and funding depend entirely on the state program and can pause when a state's allocation runs out.
U.S. DOE — Home Energy Rebates- DSIRE — every North Dakota incentive by ZIPThe N.C. Clean Energy Technology Center database. The authoritative list of state, utility and local programs.
- ENERGY STAR rebate finderUtility and manufacturer rebates by ZIP code for HVAC, water heating and appliances.
- DOE Home Energy Rebates — North Dakota statusShows whether the state's HEAR/HOMES program is open, waitlisted or not yet launched.
Frequently asked questions
How much extra tile should I order?
Order 10 percent extra for a straight layout and 15 to 20 percent for diagonal or herringbone patterns to cover cuts, breakage and future repairs from the same dye lot.
How long does tile installation take?
3-7 days including cure time. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are tile size and format — large format costs more to set; layout pattern and diagonal cuts; shower waterproofing membrane.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.