Kitchen Cabinet Refacing cost in Brownsville, TX
Brownsville, TX · updated August 2026
$9,300
Typical local cost
$4,400 – $19,600
Typical range
- per linear foot of cabinetry
- $200 – $650
- Permit
- Usually no
- Typical timeline
- 3-5 days of work
Installed, local pricing
$0 – $145 in fees
3-5 days of work
Brownsville runs -2% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Brownsville homeowners pay around $9,300. The local adjustment for this trade is x0.978 — driven mainly by Cameron County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 15 linear foot of cabinetry | $3,000 – $9,800 |
| 15 linear foot of cabinetry | $3,000 – $9,800 |
| 20 linear foot of cabinetry | $4,000 – $13,000 |
| 30 linear foot of cabinetry | $6,000 – $19,500 |
| 35 linear foot of cabinetry | $7,000 – $22,800 |
Based on Brownsville pricing of $200–$650 per linear foot of cabinetry.
Where the money goes
- Labor
- $5,600
- 60% of median
- Materials
- $3,700
- 39% of median
- Permit & fees
- $75
- 1% of median
Brownsville project costs-2% vs U.S. average
Based on Cameron County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-5 days of work
05
Closeout
Final sign-off, warranty and documentation
Brownsville labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$49–$64
Interior crews in Cameron County · -4% vs U.S. ($58/hr)
Typical crew
3 × 4 days
On-site time for a typical cabinet refacing job here.
Labor in the price
$5,600
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Brownsville wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Cameron County labor factor (x0.961). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Brownsville differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$225
Cameron County crews price 4% below the national average, and labor is 60% of this job.
Basis: Decomposition of the modeled Brownsville median against the U.S. median for this scope. · City of Brownsville building department, Hometriva methodology
Brownsville vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated kitchen cabinet refacing in Brownsville
$9,375
Likely range $4,475 – $19,675
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear feet of cabinetry and door count
- Veneer, thermofoil or solid wood fronts
- New soft-close hardware
- Adding crown molding or end panels
- Condition of the existing boxes
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Brownsville building departmentModeled estimate |
| electrical | City of Brownsville building departmentModeled estimate |
| mechanical | City of Brownsville building departmentModeled estimate |
| plumbing | City of Brownsville building departmentModeled estimate |
| zoning | City of Brownsville building departmentModeled estimate |
| fire | City of Brownsville building departmentModeled estimate |
Permit requirement in Brownsville
Usually no permit is required in Brownsville, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Brownsville building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$145Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect kitchen cabinet refacing.
Humidity
Severe84/100
Brownsville sits in Cameron County, Texas. Hurricane wind design, wind-borne debris protection and floodplain review add product-approval and inspection steps to most exterior work. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per linear foot of cabinetry |
|---|---|---|---|
| Brownsville (this page) | x0.978 | $9,300 | $200 – $650 |
| El Paso | x0.999 | $9,500 | $200 – $650 |
| Arlington | x0.999 | $9,500 | $200 – $650 |
| Corpus Christi | x0.978 | $9,300 | $200 – $650 |
What Brownsville homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Brownsville
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Brownsville cabinet refacing costs
Hometriva does not publish invented city prices. The Brownsville estimate for kitchen cabinet refacing is produced by this chain, and every input is stored separately:
- National baseline$9,500
Typical U.S. cost for kitchen cabinet refacing on a single-family home.
- Local labor factorx0.961
Brownsville-area trade labor rates, weighted at 60% of this job.
- Material factorx0.999
Material and delivery pricing into Cameron County, weighted at 40%.
- Regulatory factorx1.036
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.978
Blended Brownsville adjustment specific to kitchen cabinet refacing.
- Permit component$0 – $145
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, kitchen cabinet refacing in Brownsville carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for kitchen cabinet refacing pricing in Brownsville, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Is cabinet refacing worth it?
Refacing makes sense when the existing boxes are solid and the layout works. If the boxes are particleboard that has swollen from moisture, or you want to change the layout, full replacement is the better value.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.