Kitchen Remodel cost in Brownsville, TX
Brownsville, TX · updated August 2026
$38,100
Typical local cost
$17,800 – $91,000
Typical range
- per kitchen
- $17,800 – $91,000
- Permit
- It depends
- Typical timeline
- 6-12 weeks
Installed, local pricing
$195 – $930 in fees
6-12 weeks
Brownsville runs -1% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Brownsville homeowners pay around $38,100. The local adjustment for this trade is x0.989 — driven mainly by Cameron County labor rates and 20% exposure to local code requirements.
Estimate your Brownsville job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Flooring to buy
330 sq ft
300 sq ft room + 10% waste
- Boxes needed
- 14 boxes
- Installed cost estimate
- $1,696 – $2,594
- Underlayment
- 300 sq ft
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 kitchen | $17,800 – $91,000 |
| 1 kitchen | $17,800 – $91,000 |
| 1 kitchen | $17,800 – $91,000 |
| 1 kitchen | $17,800 – $91,000 |
| 1 kitchen | $17,800 – $91,000 |
Based on Brownsville pricing of $17,800–$91,000 per kitchen.
Where the money goes
- Labor
- $17,100
- 44% of median
- Materials
- $21,000
- 54% of median
- Permit & fees
- $565
- 1% of median
Brownsville project costs-1% vs U.S. average
Based on Cameron County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Brownsville building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
6-12 weeks
05
Inspection
Rough plumbing and electrical, Framing where walls change, Final building inspection
06
Closeout
Final sign-off, warranty and documentation
Brownsville labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$49–$64
Interior crews in Cameron County · -4% vs U.S. ($58/hr)
Typical crew
4 × 9.5 days
On-site time for a typical kitchen job here.
Labor in the price
$17,100
45% of the median — the rest is material, disposal and permit.
Because labor is 45% of this job, Brownsville wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Cameron County labor factor (x0.961). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Brownsville differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$675
Cameron County crews price 4% below the national average, and labor is 45% of this job.
Code and inspection load+$275
Kitchen Remodel carries 20% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.
Basis: Decomposition of the modeled Brownsville median against the U.S. median for this scope. · City of Brownsville building department, Hometriva methodology
Brownsville vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated kitchen remodel in Brownsville
$38,665
Likely range $18,365 – $91,565
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Cabinet grade: stock, semi-custom or custom
- Countertop material and square footage
- Whether plumbing or electrical is relocated
- Appliance package
- Flooring and any wall removal
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Brownsville building departmentModeled estimate |
| electrical | City of Brownsville building departmentModeled estimate |
| mechanical | City of Brownsville building departmentModeled estimate |
| plumbing | City of Brownsville building departmentModeled estimate |
| zoning | City of Brownsville building departmentModeled estimate |
| fire | City of Brownsville building departmentModeled estimate |
Permit requirement in Brownsville
It depends on scope. Like-for-like cosmetic work in Brownsville is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- City of Brownsville building departmentModeled estimate
- Permit fee
- Estimated allowance $195–$930Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Rough plumbing and electrical
- Framing where walls change
- Final building inspection
Local conditions that change this job
Only the exposures that materially affect kitchen remodel.
Humidity
Severe84/100
Brownsville sits in Cameron County, Texas. Hurricane wind design, wind-borne debris protection and floodplain review add product-approval and inspection steps to most exterior work. Work outside city limits is permitted by the county building department rather than the city.
Owner-occupied homes
0%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
75,132
Approximate household count in Brownsville, used to size the contractor pool for this trade.
Permit activity index
x0.98
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per kitchen |
|---|---|---|---|
| Brownsville (this page) | x0.989 | $38,100 | $17,800 – $91,000 |
| El Paso | x1.009 | $38,800 | $18,150 – $92,850 |
| Arlington | x1.009 | $38,800 | $18,150 – $92,850 |
| Corpus Christi | x0.989 | $38,100 | $17,800 – $91,000 |
What Brownsville homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Brownsville
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Brownsville kitchen costs
Hometriva does not publish invented city prices. The Brownsville estimate for kitchen remodel is produced by this chain, and every input is stored separately:
- National baseline$38,500
Typical U.S. cost for kitchen remodel on a single-family home.
- Local labor factorx0.961
Brownsville-area trade labor rates, weighted at 45% of this job.
- Material factorx0.999
Material and delivery pricing into Cameron County, weighted at 55%.
- Regulatory factorx1.036
Local code, product-approval and inspection load, applied at 20% for this project type.
- Applied multiplierx0.989
Blended Brownsville adjustment specific to kitchen remodel.
- Permit component$195 – $930
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, kitchen remodel in Brownsville carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for kitchen remodel pricing in Brownsville, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for a kitchen remodel?
Cosmetic replacement — cabinets in the same location, countertops, appliances, paint and flooring — typically does not require a permit. You do need one as soon as you move plumbing or electrical, add circuits, or alter walls.
How long does a kitchen remodel take?
A cosmetic refresh runs 3-5 weeks. A full gut with layout changes and permits typically runs 8-12 weeks, with cabinet lead time as the most common bottleneck.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.