Countertop Replacement cost in Pawtucket, RI

Pawtucket, RI · updated August 2026

$5,500

Typical local cost

$2,500 – $13,800

Typical range

per sq ft installed
$50 – $200

Installed, local pricing

Permit
Usually no

$0 – $165 in fees

Typical timeline
1 day of installation

1 day of installation, 2-3 weeks after templating

Calculate my countertops cost

Pawtucket runs +15% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Pawtucket is $5,500. The local adjustment for this trade is x1.154 — driven mainly by Providence County labor rates and 5% exposure to local code requirements.

Estimate your Pawtucket job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Square footage

180 sq ft

With waste allowance
198 sq ft
Square yards
20
Perimeter (per area)
54 ft
Square meters
16.72

Priced for Pawtucket (local adjustment x1.154).

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
30 sq ft installed$1,500 – $6,000
40 sq ft installed$2,000 – $8,000
50 sq ft installed$2,500 – $10,000
60 sq ft installed$3,000 – $12,000
80 sq ft installed$4,000 – $16,000

Based on Pawtucket pricing of $50–$200 per sq ft installed.

Where the money goes

Labor
$1,900
34% of median
Materials
$3,600
64% of median
Permit & fees
$85
2% of median

Pawtucket project costs+15% vs U.S. average

Based on Providence County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Scheduling

    No permit typically required for this scope

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1 day of installation, 2-3 weeks after templating

  5. 05

    Closeout

    Final sign-off, warranty and documentation

Pawtucket labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$62–$81

Interior crews in Providence County · +22% vs U.S. ($58/hr)

Typical crew

2 × 1.5 days

On-site time for a typical countertops job here.

Labor in the price

$1,900

35% of the median — the rest is material, disposal and permit.

Because labor is 35% of this job, Pawtucket wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national interior crew rates adjusted by the Providence County labor factor (x1.221). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Pawtucket differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$375Material and delivery$350
Dollars of the Pawtucket difference owned by each driver, versus the U.S. median for countertop replacement.
  • Trade labor rates+$375

    Providence County crews price 22% above the national average, and labor is 35% of this job.

  • Material and delivery+$350

    Materials are nationally traded, so they move less — but delivery into this market runs 11% over baseline.

Basis: Decomposition of the modeled Pawtucket median against the U.S. median for this scope. · City of Pawtucket building department, Hometriva methodology

Pawtucket vs Rhode Island vs the U.S.

Pawtucket$2,500–$13,800Rhode Island average$2,500–$13,800U.S. average$2,200–$12,000
Modeled ranges for countertop replacement. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated countertop replacement in Pawtucket

$5,585

Likely range $2,585 – $13,885

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Square footage and number of slabs
  • Material: laminate, quartz, granite or porcelain
  • Edge profile and cutouts
  • Backsplash included
  • Sink and faucet reconnection

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Pawtucket building departmentModeled estimate
electricalCity of Pawtucket building departmentModeled estimate
mechanicalCity of Pawtucket building departmentModeled estimate
plumbingCity of Pawtucket building departmentModeled estimate
zoningCity of Pawtucket building departmentModeled estimate
fireCity of Pawtucket building departmentModeled estimate

Permit requirement in Pawtucket

A permit is usually not required for countertop replacement on its own. Pawtucket still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.

Permitting authority
City of Pawtucket building departmentModeled estimate
Permit fee
Estimated allowance $0–$165Modeled from comparable fee schedules — not an official quoted fee.
Full Pawtucket permit guide for countertop replacement →

Local conditions that change this job

Only the exposures that materially affect countertop replacement.

Humidity

Severe84/100

Pawtucket sits in Providence County, Rhode Island. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer sq ft installed
Pawtucket (this page)x1.154$5,500$50 – $200
Providencex1.161$5,600$50 – $200
Cranstonx1.154$5,500$50 – $200
Warwickx1.154$5,500$50 – $200
+ Had countertop replacement done in Pawtucket? Add what you paid or were quoted

Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.

No name, email or address is collected. Reports are reviewed before they count.
No name, email or address is collected.

How Hometriva estimates Pawtucket countertops costs

Hometriva does not publish invented city prices. The Pawtucket estimate for countertop replacement is produced by this chain, and every input is stored separately:

  1. National baseline$4,800

    Typical U.S. cost for countertop replacement on a single-family home.

  2. Local labor factorx1.221

    Pawtucket-area trade labor rates, weighted at 35% of this job.

  3. Material factorx1.111

    Material and delivery pricing into Providence County, weighted at 65%.

  4. Regulatory factorx1.071

    Local code, product-approval and inspection load, applied at 5% for this project type.

  5. Applied multiplierx1.154

    Blended Pawtucket adjustment specific to countertop replacement.

  6. Permit component$0 – $165

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, countertop replacement in Pawtucket carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for countertop replacement pricing in Pawtucket, RI.

  • • National unit-cost baselines against current trade pricing
  • • Local labor and materials factors for the market
  • • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

How long does countertop replacement take?

1 day of installation, 2-3 weeks after templating. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are square footage and number of slabs; material: laminate, quartz, granite or porcelain; edge profile and cutouts.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages