Pool Enclosure / Screen Cage cost in Daytona Beach, FL
Daytona Beach, FL · updated August 2026
$18,300
Typical local cost
$9,100 – $42,600
Typical range
- per sq ft of enclosure
- $18.50 – $40.50
- Permit
- Yes
- Typical timeline
- 1-2 weeks of work
Installed, local pricing
$170 – $665 in fees
1-2 weeks of work, 4-10 weeks including engineering and permitting
Daytona Beach runs +1% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Daytona Beach is $18,300. The local adjustment for this trade is x1.015 — driven mainly by Volusia County labor rates and 80% exposure to local code requirements.
Estimate your Daytona Beach job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Priced for Daytona Beach (local adjustment x1.015).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 400 sq ft of enclosure | $7,400 – $16,200 |
| 500 sq ft of enclosure | $9,300 – $20,300 |
| 600 sq ft of enclosure | $11,100 – $24,300 |
| 800 sq ft of enclosure | $14,800 – $32,400 |
| 1,100 sq ft of enclosure | $20,400 – $44,600 |
Based on Daytona Beach pricing of $19–$41 per sq ft of enclosure.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Aluminum Fence | $18,300 – $29,300 | 30–50 yrs | Very low |
Where the money goes
- Labor
- $10,600
- 57% of median
- Materials
- $7,700
- 41% of median
- Permit & fees
- $420
- 2% of median
Daytona Beach project costs+1% vs U.S. average
Based on Volusia County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Daytona Beach building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-2 weeks of work, 4-10 weeks including engineering and permitting
05
Inspection
Footing / anchor inspection, Framing inspection, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Daytona Beach labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$53–$69
Outdoor crews in Volusia County · -3% vs U.S. ($62/hr)
Typical crew
3 × 7.5 days
On-site time for a typical pool cage job here.
Labor in the price
$10,600
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Daytona Beach wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Volusia County labor factor (x0.974). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Daytona Beach differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$425
Pool Enclosure / Screen Cage carries 80% exposure to local code requirements, and this jurisdiction's review load indexes at x1.03.
Trade labor rates-$275
Volusia County crews price 3% below the national average, and labor is 58% of this job.
Material and delivery+$125
Materials are nationally traded, so they move less — but delivery into this market runs 2% over baseline because of coastal logistics.
Basis: Decomposition of the modeled Daytona Beach median against the U.S. median for this scope. · City of Daytona Beach building department, Hometriva methodology
Daytona Beach vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated pool enclosure / screen cage in Daytona Beach
$18,720
Likely range $9,520 – $43,020
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Enclosure footprint and height
- Mansard versus gable roof style
- Screen type including no-see-um and pet screen
- Design wind speed for the parcel
- Existing deck footing capacity
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Daytona Beach building departmentModeled estimate |
| electrical | City of Daytona Beach building departmentModeled estimate |
| mechanical | City of Daytona Beach building departmentModeled estimate |
| plumbing | City of Daytona Beach building departmentModeled estimate |
| zoning | City of Daytona Beach building departmentModeled estimate |
| fire | City of Daytona Beach building departmentModeled estimate |
Permit requirement in Daytona Beach
Yes — a permit is required for pool enclosure / screen cage in Daytona Beach, FL. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Daytona Beach building departmentModeled estimate
- Permit fee
- Estimated allowance $170–$665Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Footing / anchor inspection
- Framing inspection
- Final inspection
Local conditions that change this job
Only the exposures that materially affect pool enclosure / screen cage.
Design wind speed exposure
High72/100
Named-storm exposure
High74/100
Cooling load / heat exposure
Severe82/100
Beachside properties face coastal construction control line review in addition to the standard building permit.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of enclosure |
|---|---|---|---|
| Daytona Beach (this page) | x1.015 | $18,300 | $18.50 – $40.50 |
| St. Augustine | x1.045 | $18,800 | $19 – $42 |
| Orlando | x1.051 | $18,900 | $19 – $42 |
| Jacksonville | x0.982 | $17,700 | $17.50 – $39.50 |
What Daytona Beach homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Daytona Beach
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Daytona Beach pool cage costs
Hometriva does not publish invented city prices. The Daytona Beach estimate for pool enclosure / screen cage is produced by this chain, and every input is stored separately:
- National baseline$18,000
Typical U.S. cost for pool enclosure / screen cage on a single-family home.
- Local labor factorx0.974
Daytona Beach-area trade labor rates, weighted at 58% of this job.
- Material factorx1.017
Material and delivery pricing into Volusia County, weighted at 42%.
- Regulatory factorx1.029
Local code, product-approval and inspection load, applied at 80% for this project type.
- Applied multiplierx1.015
Blended Daytona Beach adjustment specific to pool enclosure / screen cage.
- Permit component$170 – $665
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, pool enclosure / screen cage in Daytona Beach carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for pool enclosure / screen cage pricing in Daytona Beach, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for a pool cage?
Yes. Screen enclosures are engineered structures in Florida and require a building permit with signed and sealed plans plus wind-load calculations.
Do I need a permit for pool enclosure / screen cage in Daytona Beach, FL?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does pool enclosure / screen cage take?
1-2 weeks of work, 4-10 weeks including engineering and permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are enclosure footprint and height; mansard versus gable roof style; screen type including no-see-um and pet screen.
Sources
Sources & verification
- City of Daytona Beach building department
- Daytona Beach permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.