Pool Enclosure / Screen Cage cost in Orlando, FL
Orlando, FL · updated August 2026
$18,900
Typical local cost
$9,500 – $44,100
Typical range
- per sq ft of enclosure
- $19 – $42
- Permit
- Yes
- Typical timeline
- 1-2 weeks of work
Installed, local pricing
$180 – $700 in fees
1-2 weeks of work, 4-10 weeks including engineering and permitting
Orlando runs +5% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Orlando is $18,900. The local adjustment for this trade is x1.051 — driven mainly by Orange County labor rates and 80% exposure to local code requirements.
Estimate your Orlando job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Priced for Orlando (local adjustment x1.051).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 400 sq ft of enclosure | $7,600 – $16,800 |
| 500 sq ft of enclosure | $9,500 – $21,000 |
| 600 sq ft of enclosure | $11,400 – $25,200 |
| 800 sq ft of enclosure | $15,200 – $33,600 |
| 1,100 sq ft of enclosure | $20,900 – $46,200 |
Based on Orlando pricing of $19–$42 per sq ft of enclosure.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Aluminum Fence | $18,900 – $30,200 | 30–50 yrs | Very low |
Where the money goes
- Labor
- $11,000
- 57% of median
- Materials
- $7,900
- 41% of median
- Permit & fees
- $440
- 2% of median
Orlando project costs+5% vs U.S. average
Based on Orange County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Orlando Permitting Services
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-2 weeks of work, 4-10 weeks including engineering and permitting
05
Inspection
Footing / anchor inspection, Framing inspection, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Orlando labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$56–$73
Outdoor crews in Orange County · +3% vs U.S. ($62/hr)
Typical crew
3 × 7 days
On-site time for a typical pool cage job here.
Labor in the price
$11,000
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Orlando wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Orange County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Orlando differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$525
Pool Enclosure / Screen Cage carries 80% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.
Trade labor rates+$275
Orange County crews price 3% above the national average, and labor is 58% of this job.
Material and delivery+$100
Materials are nationally traded, so they move less — but delivery into this market runs 1% over baseline.
Basis: Decomposition of the modeled Orlando median against the U.S. median for this scope. · City of Orlando Permitting Services, Hometriva methodology
Orlando vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated pool enclosure / screen cage in Orlando
$19,340
Likely range $9,940 – $44,540
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Enclosure footprint and height
- Mansard versus gable roof style
- Screen type including no-see-um and pet screen
- Design wind speed for the parcel
- Existing deck footing capacity
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Orlando Permitting ServicesConfirmed department |
| electrical | City of Orlando Permitting ServicesConfirmed department |
| mechanical | City of Orlando Permitting ServicesConfirmed department |
| plumbing | City of Orlando Permitting ServicesConfirmed department |
| zoning | City of Orlando Permitting ServicesConfirmed department |
| fire | City of Orlando Permitting ServicesConfirmed department |
Permit requirement in Orlando
Yes — a permit is required for pool enclosure / screen cage in Orlando, FL. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Orlando Permitting ServicesConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $180–$700.
Inspections
- Footing / anchor inspection
- Framing inspection
- Final inspection
Local conditions that change this job
Only the exposures that materially affect pool enclosure / screen cage.
Design wind speed exposure
High62/100
Named-storm exposure
High66/100
Cooling load / heat exposure
Severe87/100
Orlando is inland with a 130 mph design wind speed, so opening protection requirements are lighter than South Florida.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of enclosure |
|---|---|---|---|
| Orlando (this page) | x1.051 | $18,900 | $19 – $42 |
| Kissimmee | x1.000 | $18,000 | $18 – $40 |
| Lakeland | x0.961 | $17,300 | $17.50 – $38.50 |
| Daytona Beach | x1.015 | $18,300 | $18.50 – $40.50 |
What Orlando homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Orlando
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Orlando pool cage costs
Hometriva does not publish invented city prices. The Orlando estimate for pool enclosure / screen cage is produced by this chain, and every input is stored separately:
- National baseline$18,000
Typical U.S. cost for pool enclosure / screen cage on a single-family home.
- Local labor factorx1.026
Orlando-area trade labor rates, weighted at 58% of this job.
- Material factorx1.014
Material and delivery pricing into Orange County, weighted at 42%.
- Regulatory factorx1.037
Local code, product-approval and inspection load, applied at 80% for this project type.
- Applied multiplierx1.051
Blended Orlando adjustment specific to pool enclosure / screen cage.
- Permit component$180 – $700
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, pool enclosure / screen cage in Orlando carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for pool enclosure / screen cage pricing in Orlando, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for a pool cage?
Yes. Screen enclosures are engineered structures in Florida and require a building permit with signed and sealed plans plus wind-load calculations.
Do I need a permit for pool enclosure / screen cage in Orlando, FL?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does pool enclosure / screen cage take?
1-2 weeks of work, 4-10 weeks including engineering and permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are enclosure footprint and height; mansard versus gable roof style; screen type including no-see-um and pet screen.
Sources
Sources & verification
- City of Orlando Permitting Services
- Orlando permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.