Whole-House Repipe cost in Washington, DC
Washington, DC · updated August 2026
$10,900
Typical local cost
$6,000 – $21,200
Typical range
- per house repiped
- $5,950 – $21,200
- Permit
- Yes
- Typical timeline
- 3-6 days of work
Installed, local pricing
$155 – $585 in fees
3-6 days of work, 2-5 weeks including inspections and drywall repair
Washington runs +32% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Washington homeowners pay around $10,900. The local adjustment for this trade is x1.325 — driven mainly by District of Columbia labor rates and 55% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 house repiped | $6,000 – $21,200 |
| 1 house repiped | $6,000 – $21,200 |
| 1 house repiped | $6,000 – $21,200 |
| 1 house repiped | $6,000 – $21,200 |
| 1 house repiped | $6,000 – $21,200 |
Based on Washington pricing of $5,950–$21,200 per house repiped.
Where the money goes
- Labor
- $7,600
- 67% of median
- Materials
- $3,300
- 29% of median
- Permit & fees
- $370
- 3% of median
Washington project costs+32% vs U.S. average
Based on District of Columbia labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Washington building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-6 days of work, 2-5 weeks including inspections and drywall repair
05
Inspection
Rough plumbing / pressure test, Drywall patch, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Washington labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$119–$154
Plumbing crews in District of Columbia · +29% vs U.S. ($105/hr)
Typical crew
3 × 2.5 days
On-site time for a typical repipe job here.
Labor in the price
$7,600
70% of the median — the rest is material, disposal and permit.
Because labor is 70% of this job, Washington wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the District of Columbia labor factor (x1.286). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Washington differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$1,650
District of Columbia crews price 29% above the national average, and labor is 70% of this job.
Code and inspection load+$550
Whole-House Repipe carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.12.
Material and delivery+$325
Materials are nationally traded, so they move less — but delivery into this market runs 14% over baseline.
Permit fees+$75
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Washington median against the U.S. median for this scope. · City of Washington building department, Hometriva methodology
Washington vs District of Columbia vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated whole-house repipe in Washington
$11,270
Likely range $6,370 – $21,570
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number of bathrooms and fixtures
- Slab versus attic routing
- PEX versus CPVC versus copper
- Drywall cutting and patching
- House square footage and stories
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Washington building departmentModeled estimate |
| electrical | City of Washington building departmentModeled estimate |
| mechanical | City of Washington building departmentModeled estimate |
| plumbing | City of Washington building departmentModeled estimate |
| zoning | City of Washington building departmentModeled estimate |
| fire | City of Washington building departmentModeled estimate |
Permit requirement in Washington
Yes — a permit is required for whole-house repipe in Washington, DC. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Washington building departmentModeled estimate
- Permit fee
- Estimated allowance $155–$585Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Rough plumbing / pressure test
- Drywall patch
- Final inspection
Local conditions that change this job
Only the exposures that materially affect whole-house repipe.
Humidity
High66/100
The Department of Buildings reviews all work district-wide, and historic-district review covers a large share of the housing stock.
Owner-occupied homes
42%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
268,721
Approximate household count in Washington, used to size the contractor pool for this trade.
Permit activity index
x1.30
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per house repiped |
|---|---|---|---|
| Washington (this page) | x1.325 | $10,900 | $5,950 – $21,200 |
| Baltimore | x1.132 | $9,300 | $5,100 – $18,100 |
| Richmond | x1.008 | $8,300 | $4,550 – $16,150 |
| Philadelphia | x1.237 | $10,100 | $5,550 – $19,800 |
What Washington homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Washington
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Washington repipe costs
Hometriva does not publish invented city prices. The Washington estimate for whole-house repipe is produced by this chain, and every input is stored separately:
- National baseline$8,200
Typical U.S. cost for whole-house repipe on a single-family home.
- Local labor factorx1.286
Washington-area trade labor rates, weighted at 70% of this job.
- Material factorx1.137
Material and delivery pricing into District of Columbia, weighted at 30%.
- Regulatory factorx1.122
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.325
Blended Washington adjustment specific to whole-house repipe.
- Permit component$155 – $585
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, whole-house repipe in Washington carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for whole-house repipe pricing in Washington, DC.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to repipe a house?
Yes. A whole-house repipe is major plumbing work and requires a permit, a pressure test inspection and a final inspection in every Florida jurisdiction.
Sources
Sources & verification
- City of Washington building department
- Washington permit portal
- DC Department of Buildings
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.