Whole-House Repipe cost in Bismarck, ND

Bismarck, ND · updated August 2026

$8,000

Typical local cost

$4,400 – $15,600

Typical range

per house repiped
$4,400 – $15,650

Installed, local pricing

Permit
Yes

$100 – $370 in fees

Typical timeline
3-6 days of work

3-6 days of work, 2-5 weeks including inspections and drywall repair

Bismarck runs -2% against the U.S. average · data confidence Medium · modeled estimate, not a quote

Most Bismarck homeowners pay around $8,000. The local adjustment for this trade is x0.977 — driven mainly by Burleigh County labor rates and 55% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
1 house repiped$4,400$15,700
1 house repiped$4,400$15,700
1 house repiped$4,400$15,700
1 house repiped$4,400$15,700
1 house repiped$4,400$15,700

Based on Bismarck pricing of $4,400–$15,650 per house repiped.

Where the money goes

Labor
$5,600
68% of median
Materials
$2,400
29% of median
Permit & fees
$235
3% of median

Bismarck project costs-2% vs U.S. average

Based on Burleigh County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Bismarck building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    3-6 days of work, 2-5 weeks including inspections and drywall repair

  5. 05

    Inspection

    Rough plumbing / pressure test, Drywall patch, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Bismarck labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$90–$117

Plumbing crews in Burleigh County · -3% vs U.S. ($105/hr)

Typical crew

3 × 2.5 days

On-site time for a typical repipe job here.

Labor in the price

$5,600

70% of the median — the rest is material, disposal and permit.

Because labor is 70% of this job, Bismarck wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national plumbing crew rates adjusted by the Burleigh County labor factor (x0.974). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Bismarck differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$150Permit fees$50Code and inspection load$50
Dollars of the Bismarck difference owned by each driver, versus the U.S. median for whole-house repipe.
  • Trade labor rates-$150

    Burleigh County crews price 3% below the national average, and labor is 70% of this job.

  • Permit fees-$50

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

  • Code and inspection load-$50

    Whole-House Repipe carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x0.99.

Basis: Decomposition of the modeled Bismarck median against the U.S. median for this scope. · City of Bismarck building department, Hometriva methodology

Bismarck vs North Dakota vs the U.S.

Bismarck$4,400$15,600North Dakota average$4,400$15,600U.S. average$4,500$16,000
Modeled ranges for whole-house repipe. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated whole-house repipe in Bismarck

$8,235

Likely range $4,635$15,835

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number of bathrooms and fixtures
  • Slab versus attic routing
  • PEX versus CPVC versus copper
  • Drywall cutting and patching
  • House square footage and stories

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Bismarck building departmentModeled estimate
electricalCity of Bismarck building departmentModeled estimate
mechanicalCity of Bismarck building departmentModeled estimate
plumbingCity of Bismarck building departmentModeled estimate
zoningCity of Bismarck building departmentModeled estimate
fireCity of Bismarck building departmentModeled estimate

Permit requirement in Bismarck

Yes — a permit is required for whole-house repipe in Bismarck, ND. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Bismarck building departmentModeled estimate
Permit fee
Estimated allowance $100$370Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Rough plumbing / pressure test
  2. Drywall patch
  3. Final inspection
Full Bismarck permit guide for whole-house repipe

Local conditions that change this job

Only the exposures that materially affect whole-house repipe.

Humidity

Severe84/100

Bismarck sits in Burleigh County, North Dakota. Heavy snow load and ice-dam risk change roofing, insulation and gutter specifications, and compress the outdoor work season. Work outside city limits is permitted by the county building department rather than the city.

Owner-occupied homes

0%

Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.

Households in market

29,655

Approximate household count in Bismarck, used to size the contractor pool for this trade.

Permit activity index

x0.82

Relative permit volume and fee load versus the national baseline.

Nearby market comparison

MarketLocal factorMedianPer house repiped
Bismarck (this page)x0.977$8,000$4,400$15,650
Fargox0.977$8,000$4,400$15,650
Grand Forksx0.938$7,700$4,200$15,000
Minotx0.938$7,700$4,200$15,000

What Bismarck homeowners actually paid

Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Bismarck

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Bismarck repipe costs

Hometriva does not publish invented city prices. The Bismarck estimate for whole-house repipe is produced by this chain, and every input is stored separately:

  1. National baseline$8,200

    Typical U.S. cost for whole-house repipe on a single-family home.

  2. Local labor factorx0.974

    Bismarck-area trade labor rates, weighted at 70% of this job.

  3. Material factorx1.005

    Material and delivery pricing into Burleigh County, weighted at 30%.

  4. Regulatory factorx0.989

    Local code, product-approval and inspection load, applied at 55% for this project type.

  5. Applied multiplierx0.977

    Blended Bismarck adjustment specific to whole-house repipe.

  6. Permit component$100 – $370

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, whole-house repipe in Bismarck carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for whole-house repipe pricing in Bismarck, ND.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit to repipe a house?

Yes. A whole-house repipe is major plumbing work and requires a permit, a pressure test inspection and a final inspection in every Florida jurisdiction.

Sources

Sources & verification

Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.

Related pages