Melbourne, FL · Brevard County
Driveway Replacement in Melbourne, FL: Cost & Permits
What driveway replacement actually costs in Melbourne, whether you need a permit, which inspections apply, and how long the job takes.
Model reviewed August 2026
Typical local cost
$8,800
$4,300 – $19,400
per sq ft of driveway
$6 – $22.50
Permit fee
$80 – $345
Modeled allowance
vs national
+2%
local labor & materials
Looking for pricing detail? The full driveway replacement cost breakdown for Melbourne covers cost by size and material, the local cost model and nearby markets.
Do you need a permit for driveway replacement in Melbourne, FL?
Usually yes
In most cases yes — Brevard County and the City of Melbourne generally require a permit for driveway replacement. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.
Brevard County design wind speeds step up sharply toward the barrier island.
Cost breakdown in Melbourne
| Low endSimple scope, competitive bid | $4,300 |
|---|---|
| TypicalMost homeowners land here | $8,800 |
| High endComplex access, premium materials | $19,400 |
| per sq ft of driveway | $6 – $22.50 |
| Permit fee | Estimated allowance $80–$345Modeled from comparable fee schedules — not an official quoted fee. |
| Permit authority | City of Melbourne building departmentModeled estimate |
| Timeline | 2-4 days of work plus 7 days of concrete cure, 2-5 weeks total |
Math: national median $8,600 × 1.023 = $8,800 in Melbourne — +2% versus the national model. The multiplier blends local labor and material costs with this project's labor share, so it is not the same as the city's overall cost index (0.99). Permit fees use a 0.98 local multiplier. Estimates, not quotes.
What drives your price here
- Square footage and thickness
- Concrete versus pavers versus asphalt
- Demolition and haul-off of the old surface
- Base preparation and drainage
- Apron work in the public right-of-way
Permit process and inspections
| Permit required | Usually yes |
|---|---|
| Who pulls it | Contractor or owner-builder |
| Inspections | Form / subgrade inspection, Final inspection |
| Documents | Permit application, Site plan with dimensions and impervious area, Right-of-way permit for apron work |
| Apply | Melbourne permit portal |
Frequently asked questions
Do I need a permit to replace a driveway?
Most Florida cities require a permit for driveway replacement or expansion because of impervious surface limits and stormwater rules. Work touching the apron in the right-of-way usually needs a separate right-of-way permit.
How long does driveway replacement take?
2-4 days of work plus 7 days of concrete cure, 2-5 weeks total. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are square footage and thickness; concrete versus pavers versus asphalt; demolition and haul-off of the old surface.
Driveway costs in nearby cities
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.