Kitchen Remodel cost in Palm Springs, CA
Palm Springs, CA · updated August 2026
$50,000
Typical local cost
$23,400 – $119,400
Typical range
- per kitchen
- $23,350 – $119,400
- Permit
- It depends
- Typical timeline
- 6-12 weeks
Installed, local pricing
$280 – $1,330 in fees
6-12 weeks
Palm Springs runs +30% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Palm Springs homeowners pay around $50,000. The local adjustment for this trade is x1.298 — driven mainly by Riverside County labor rates and 20% exposure to local code requirements.
Estimate your Palm Springs job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Flooring to buy
330 sq ft
300 sq ft room + 10% waste
- Boxes needed
- 14 boxes
- Installed cost estimate
- $2,338 – $3,576
- Underlayment
- 300 sq ft
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 kitchen | $23,400 – $119,400 |
| 1 kitchen | $23,400 – $119,400 |
| 1 kitchen | $23,400 – $119,400 |
| 1 kitchen | $23,400 – $119,400 |
| 1 kitchen | $23,400 – $119,400 |
Based on Palm Springs pricing of $23,350–$119,400 per kitchen.
Where the money goes
- Labor
- $22,500
- 44% of median
- Materials
- $27,500
- 54% of median
- Permit & fees
- $805
- 2% of median
Palm Springs project costs+30% vs U.S. average
Based on Riverside County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Palm Springs building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
6-12 weeks
05
Inspection
Rough plumbing and electrical, Framing where walls change, Final building inspection
06
Closeout
Final sign-off, warranty and documentation
Palm Springs labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$70–$90
Interior crews in Riverside County · +36% vs U.S. ($58/hr)
Typical crew
4 × 9 days
On-site time for a typical kitchen job here.
Labor in the price
$22,500
45% of the median — the rest is material, disposal and permit.
Because labor is 45% of this job, Palm Springs wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Riverside County labor factor (x1.364). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Palm Springs differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$6,300
Riverside County crews price 36% above the national average, and labor is 45% of this job.
Material and delivery+$3,650
Materials are nationally traded, so they move less — but delivery into this market runs 17% over baseline.
Code and inspection load+$1,225
Kitchen Remodel carries 20% exposure to local code requirements, and this jurisdiction's review load indexes at x1.16.
Permit fees+$225
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Palm Springs median against the U.S. median for this scope. · City of Palm Springs building department, Hometriva methodology
Palm Springs vs California vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated kitchen remodel in Palm Springs
$50,805
Likely range $24,205 – $120,205
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Cabinet grade: stock, semi-custom or custom
- Countertop material and square footage
- Whether plumbing or electrical is relocated
- Appliance package
- Flooring and any wall removal
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Palm Springs building departmentModeled estimate |
| electrical | City of Palm Springs building departmentModeled estimate |
| mechanical | City of Palm Springs building departmentModeled estimate |
| plumbing | City of Palm Springs building departmentModeled estimate |
| zoning | City of Palm Springs building departmentModeled estimate |
| fire | City of Palm Springs building departmentModeled estimate |
Permit requirement in Palm Springs
It depends on scope. Like-for-like cosmetic work in Palm Springs is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- City of Palm Springs building departmentModeled estimate
- Permit fee
- Estimated allowance $280–$1,330Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Rough plumbing and electrical
- Framing where walls change
- Final building inspection
Local conditions that change this job
Only the exposures that materially affect kitchen remodel.
Humidity
Severe84/100
Palm Springs sits in Riverside County, California. Extreme summer heat and high UV load shorten roof membrane, exterior paint and HVAC service life, so replacement cycles run shorter than the national average. Work outside city limits is permitted by the county building department rather than the city.
Owner-occupied homes
0%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
17,884
Approximate household count in Palm Springs, used to size the contractor pool for this trade.
Permit activity index
x1.40
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per kitchen |
|---|---|---|---|
| Palm Springs (this page) | x1.298 | $50,000 | $23,350 – $119,400 |
| San Francisco | x1.394 | $53,700 | $25,100 – $128,250 |
| Long Beach | x1.372 | $52,800 | $24,700 – $126,200 |
| Oakland | x1.372 | $52,800 | $24,700 – $126,200 |
What Palm Springs homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Palm Springs
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Palm Springs kitchen costs
Hometriva does not publish invented city prices. The Palm Springs estimate for kitchen remodel is produced by this chain, and every input is stored separately:
- National baseline$38,500
Typical U.S. cost for kitchen remodel on a single-family home.
- Local labor factorx1.364
Palm Springs-area trade labor rates, weighted at 45% of this job.
- Material factorx1.172
Material and delivery pricing into Riverside County, weighted at 55%.
- Regulatory factorx1.159
Local code, product-approval and inspection load, applied at 20% for this project type.
- Applied multiplierx1.298
Blended Palm Springs adjustment specific to kitchen remodel.
- Permit component$280 – $1,330
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, kitchen remodel in Palm Springs carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for kitchen remodel pricing in Palm Springs, CA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for a kitchen remodel?
Cosmetic replacement — cabinets in the same location, countertops, appliances, paint and flooring — typically does not require a permit. You do need one as soon as you move plumbing or electrical, add circuits, or alter walls.
How long does a kitchen remodel take?
A cosmetic refresh runs 3-5 weeks. A full gut with layout changes and permits typically runs 8-12 weeks, with cabinet lead time as the most common bottleneck.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.